Engine Coolant


Anything goes - doesn't fit any other category!
  • Sponsored Links
Post Reply
User avatar
Pam
Posts: 342
Joined: Wed May 11, 2011 12:19 pm
Location: Canada
Motorcycle: 1982 Kawazaki KZ 1100 1983 Yamaha Venture Royal (sold and miss it) 2006 Goldwing GL1800 1992 Yamaha Virago

Engine Coolant

Post by Pam » Fri Jun 08, 2018 3:07 pm



Is there a suitable substitute to Honda coolant? I plan on changing my coolant but can't find a coolant that says it is silicate and borate free. I don't have a Honda store close, and have spent a lot of time reading labels, but none seem to fit the bill. I have found one coolant that Says it is safe for Honda but I am thinking that is a Honda car. Any input would be greatly appreciated



User avatar
DenverWinger
Posts: 295
Joined: Thu Jun 23, 2011 2:20 pm
Location: Denver, CO
Motorcycle: 1980 GL-1100 STD Vetter (2005-)
1993 GL-1500 Aspencade (2017-)
1983 Trav-Lite Camper (2010-)
Past rides
1972 CL-350 (1980-1988) sold
1978 Suzuki GS-550 (1985-2005) sold
1977 GL-1000 (2002-2006) sold

Re: Engine Coolant

Post by DenverWinger » Sat Jun 09, 2018 7:08 am

I found 'Beck-Arnley Euro SF+ Concentrate' in the local auto parts store, 'Made in Germany', and specifically mentions no amines, nitrates, phosphates or silicates on the label.

A little on the 'spendy' side (probably no more than Honda coolant though) but it looks like a product the GL1500 will be happy to have inside her...
They say 98% of all Hardleys ever made are still on the road..... The other 2% made it home. :lol:
(I stole this from somebody on another GW site...) :roll:

User avatar
cbx4evr
Posts: 1464
Joined: Tue Mar 09, 2010 8:35 pm
Location: Edmonton, AB Canada
Motorcycle: 2006 Kawasaki Concours
2000 GL1500SE - sold :-(
2004 Kawasaki KLR 650
Solex 5000 - gave to son
1980 Honda CBX - sold :-(
1981 Honda CBX - sold :-(
Contact:

Re: Engine Coolant

Post by cbx4evr » Sat Jun 09, 2018 9:16 pm

Honda car coolant is fine to use. I see you are in Canada. This will work just fine.

http://www.canadiantire.ca/en/pdp/oem-c ... p.html#srp
"It´s a friggen motorcycle, it´s not supposed to be comfortable, quiet or safe. The wind noise is supposed to hurt your ears, the seat should be hard and riding it should make you s**t your pants every now and then. "

User avatar
Pam
Posts: 342
Joined: Wed May 11, 2011 12:19 pm
Location: Canada
Motorcycle: 1982 Kawazaki KZ 1100 1983 Yamaha Venture Royal (sold and miss it) 2006 Goldwing GL1800 1992 Yamaha Virago

Re: Engine Coolant

Post by Pam » Sat Jun 09, 2018 11:08 pm

Was in Can tire today and found that Honda compatible product, picked up a jug nothing left to do but get the flushing done.

Thanks guys

User avatar
823JIM
Posts: 86
Joined: Sun Jul 30, 2017 9:18 pm
Location: Belding, Michigan, USA
Motorcycle: 2003 GL1800 Goldwing
1978 KZ650 (needs restoring)

Re: Engine Coolant

Post by 823JIM » Tue Jun 19, 2018 1:28 pm

Email I sent to Prestone:
Is Prestone 50/50 predeluted with Cor-Guard silicate free? I have a Honda that calls for silicate free coolant, am I safe with this Prestone product?

Their reply:
Good Morning Jim,
Prestone Information <Information@prestone.com>
Yes, it is, and yes, you are. Please let me know if you require anything further.
Aaron Jones
Prestone Consumer Relations Representative


Friends don't let friends do stupid stuff (alone)
Jim King

Post Reply