I just bought a (new to me) 2007 gl1800 trike and need a recommendation for a pair of headsets /mic to put into our helmets
New or used. Your response is greatly appreciated.

Capt Ken
Ken Peterson
kenpeterson0961@gmail.com

Bob, Sorry, we all are aware of the outrageous medical billing taking place across the country. ‘Nuff said! Deep squats will do almost as well.... just make sure you have a sturdy means if maintaining your balance. I really don’t mean to intrude,but I had to learn this all the hard way due to a seri...

Big Bob
Do you have time and access to a gym or fitness center with a leg press? That machine is THE best for strengthening and building range of motion in your knee and thigh/calf muscles within the least amount of time.
Take care and good luck!

Big Bob What you do is your bussiness. However, be aware that if you chose to wait 4 months without regerious, consists to exercising of that new knee you are in great risk of the knee freezing up with scar tissue that you will not be able to work out In short, that requires going back to the OR tab...

You’ll do fine! Some therapists are hesitant to be aggressive in obtaining max bend as soon as possible. Understandable given the discomfort level required. That said, if you push hard to get that range early on you will find a much better result. Ain’t easy Bub, but worth the effort for a better re...

Bob As I said in my initial post and as several have repeated, strength training and stationary bike (deep squats and leg press) to strengthen and stretch ALL the muscles and tendons of THE ENTIRE LEG is key to achievement of your confidence and mobility you want. Have you seen a video of the entire...

[*]Bob The amount of mobility you retain is up to you and you your determination! The key is to force yourself to achieve maximum bend in the knee joint as early as possible during post surgery therapy. After therapy, walk, walk, & more walking. Deep squats, leg moving at full rotation of thr kn...

The fuses were all good. I cleaned the connected contacts with contact cleaner and Q-tip then blew them dry wit a hair dryer. Seems to have worked.
Thanks to all for your guidance and assistance.
CaptKen

Problem solved! Actually a combination of the sugested fixes,,,,, i thank all of your quick responses, Your help saved me enough $$ to allow me to replace all the dash lights, headlight bulbs, and side markers w/ LEDs. FYI.... wish.com ( search for LEDS) is a great source for all types of LEDs. Ship...

My G1500a trike has lost ability to hold time after engine shutdown. Key sw on and the clock works fine, just has to be reset. Does any one know where I can find a pin diagram of the display module connector?

I haven't checked any thing yet.... wanted to get some advice as to where to start. Thanks for the reply.

I have an issue with the clock and radio freq display in the display panel of my 1997 GL1500A. All works fine so long as the ignition switch is on and engine is running (and the display clock and tuner freq has been reset). Shut the bike down and all display functions revert back to the power of con...