dont for get to have a close look at the dog bone fuse! maybe even replace it with the blade type fuse mod.

a pleasure to use. thanks

wda-83wing wrote:i have a extra ant. dist. if you still need one. 20.00 plus fright. zipper here is 30401. let me know yes or no , if you will please.
thanks wayne

i no longer have the ant. dist. wayne

have you checked to make sure that the radio is stopping on the station feg and not below or just above ? happened to mine.

i have a extra ant. dist. if you still need one. 20.00 plus fright. zipper here is 30401. let me know yes or no , if you will please.
thanks wayne

WingAdmin wrote:Well I went out for a ride last night, in below-freezing temps. The roads were clear, my gear was heated, and I was toasty warm! I say bah to snow!

sounds like a die hard. just watch out for the ICE. ride safe.

would you happen to have the complete brake system ? masters to calipers . front and rear . if so what would be your price for them ? going to convert my 83 to 82.(unlinked brakes) . thanks

yes in proper tune they are a amazing machine.

i put jardines on mine in 06. it was a barn find. the chrome is still shiney and the tone is about the same as when i put`em on.mac`s , from what i`ve seen tend to rust up and be a bit more louder.
for a one time purchase . i would go with the s/s motads.

still waiting for pics.

now there is some thing i can use. thats for sure. i`m in.

yeah i seen that. but i don't have 200 for a CB. thanks any way.

i guess the main item i was hope to get in a trade would be the CB unit for the type 2 radio . one thats working .

1983 aspencade front calipers . will need to rebuilt for useage, at least i would . looking for interstate or standard parts , 1983 . or $30.00 + fright . thanks for looking .

also-- you might replace the rubber seals that go around the cover bolts. they loose tension after a while. they apply pressure to the cover gasket.

ok-- thanks for the confermation on the # from napa. i am off to napa this morning.

detdrbuzzard wrote:napa gold universal 1/4 fuel filter 3011 i bleave is the number, i'll check and correct the number if it wrong once i get home

are you sure on the napa #s? got to get one or two.

wda-83wing wrote:AL
do you still have the clutch parts? if so what would you take (bottom dollar) for it all? thanks wayne

still don't know how much you would have to get for it all. wayne

AL
do you still have the clutch parts? if so what would you take (bottom dollar) for it all? thanks wayne

i have a set of jardines on my 83 interstate , have had sence 06. no rust yet . they dont list a 83 . so i went with the 82s . some slite mods were required. i had to cut off the center stand stop and take off 1/2 in. and weld it back on to the muffler mont bracket. next i had to make up a 3 in. dro...

glad you found one . because the one i had is gone.

dont for get too take the float needle seat out too. there is a fine mesh screen on the other side . it clips to the upper part of the seat. clean and reinstall.

most likley old dried up gas and some rust from the tank. yeah the super fine stuff will get passed the filter. i`ll bet that you`ll find the float needles are stuck too. must have sit for a long while on the side stand.

nope--- no points on the 82 interstate. CDI ingition. started with the 80 and used to date.

just happen to have a extra stand off my 83 aspencade parts bike. 35 + postage and its yours. pm if your interested.