Search found 13 matches

by micalocus541
Fri Nov 26, 2021 3:13 am
Forum: GL1000 Information & Questions
Topic: Rebuilding carbs
Replies: 20
Views: 222

Re: Rebuilding carbs

The area marked, was complete sealed shut... And I believe it was the carb that supplied the rest of the other carbs with fuel.. I'm not 100% on that, I'm still learning
by micalocus541
Fri Nov 26, 2021 3:08 am
Forum: GL1000 Information & Questions
Topic: Rebuilding carbs
Replies: 20
Views: 222

Re: Rebuilding carbs

I would if I had the spare money, it's why I'm trying to reuse as much as I can, all my jets are in perfect shape... I believe, and I think my main problem was the air jet cover gasket was in very bad shape and like cemented to the sides of it's chamber, stuck in place
by micalocus541
Fri Nov 26, 2021 1:46 am
Forum: GL1000 Information & Questions
Topic: Rebuilding carbs
Replies: 20
Views: 222

Re: Rebuilding carbs

All of the rubber o rings have deteriorated an broken apart and the rubber blanking piece got completely ripped up on 3 of the 4 carbs but I'm letting all the jets soak and I will be doing the very deep clean on all of it, I want to use as much stock parts on then carbs as I can, so I'm hoping to cl...
by micalocus541
Thu Nov 25, 2021 2:31 pm
Forum: GL1000 Information & Questions
Topic: Rebuilding carbs
Replies: 20
Views: 222

Re: Rebuilding carbs

But thw kit will work though?
by micalocus541
Thu Nov 25, 2021 12:27 am
Forum: GL1000 Information & Questions
Topic: Rebuilding carbs
Replies: 20
Views: 222

Re: Rebuilding carbs

And also the rubber blanking plug completely turn to dust an I had to get tweezers an pull the pieces out of the little hole
by micalocus541
Thu Nov 25, 2021 12:16 am
Forum: GL1000 Information & Questions
Topic: Rebuilding carbs
Replies: 20
Views: 222

Re: Rebuilding carbs

You were right, I got them out an I think the numbers on them are 120 and 60 with the keikin symbol
by micalocus541
Wed Nov 24, 2021 11:51 pm
Forum: GL1000 Information & Questions
Topic: Rebuilding carbs
Replies: 20
Views: 222

Re: Rebuilding carbs

And the history to this bike is, the family has been having a difficult time lately with alot of visits to the ICU( for my father) but anyways some "family" out of no where from my mom's side... That I have never met or knew they existed, well they knew I existed an didnt bother messaging ...
by micalocus541
Wed Nov 24, 2021 11:39 pm
Forum: GL1000 Information & Questions
Topic: Rebuilding carbs
Replies: 20
Views: 222

Re: Rebuilding carbs

I haven't used any cleaner for them except wiping them down with alot of rags but I can show picture of the #3 carbs float bowl off.
by micalocus541
Wed Nov 24, 2021 10:40 pm
Forum: GL1000 Information & Questions
Topic: Rebuilding carbs
Replies: 20
Views: 222

Re: Rebuilding carbs

So yes you were right. An that's freaking awesome, I have tried going everywhere around to local shops, to Honda, an to auto parts stores an they can't tell me jack diddly on this bike.... Finally somebody knows lol I'm relieved a bit haha
by micalocus541
Wed Nov 24, 2021 10:39 pm
Forum: GL1000 Information & Questions
Topic: Rebuilding carbs
Replies: 20
Views: 222

Re: Rebuilding carbs

I haven't ordered anything yet, and I apologize for the mistake, this is my first bike, it's definitely been a learning experience, this project is being a alittle difficult but eventually I'll get her running. I have never taken apart a carburetor set up like this one so I'm trying to go slow an ma...
by micalocus541
Wed Nov 24, 2021 9:56 pm
Forum: GL1000 Information & Questions
Topic: Rebuilding carbs
Replies: 20
Views: 222

Re: Rebuilding carbss

Will this work out??
by micalocus541
Wed Nov 24, 2021 9:25 pm
Forum: GL1000 Information & Questions
Topic: Rebuilding carbs
Replies: 20
Views: 222

Re: Rebuilding carbs

Here are some pictures, let me know if this helps.
by micalocus541
Wed Nov 24, 2021 8:37 pm
Forum: GL1000 Information & Questions
Topic: Rebuilding carbs
Replies: 20
Views: 222

Rebuilding carbs

This has probably been asked before, but I just recently been given a 1979 Honda Goldwing GL1000, I am trying to rebuild the carbs but every time I find a kit, it has different float needles in the kit. As I was taking the carbs apart slowly and labeling everything in their own little tote, I realiz...