Bartw wrote: ↑Fri Nov 29, 2024 1:36 pm I decided to swap the knock sensors and sure as S#i+ got error code 26. So the Knock sensor I bought was bad out of the package.

Was the new knock sensor an OEM on ???

Hi Experts!!!! I'd like to know if there is a reinforced substitute for 82310-MCA-A60ZA. This part keeps cracking over and over. It's nonsense how this heavy lid seats only in this tiny piece of plastic. Do you guys happen to know if there is a metallic version of this part? Thanks in advance for y...

Hello, I just purchased a 2007 Goldwing. One issue this bike has is that the trunk is a little bit loose. The whole thing wobbles when you close the trunk lid. Any suggestions on how to tighten it up? The trunk box os held in place with 4 bolts inside the trunk. There heads are an 8mm, and they sit...

sly-fox54 wrote: ↑Sun Nov 24, 2024 10:19 pm Oh how happy I am tonight!! A great big thank you, thank you to Goldwing Greg and Techdude for your outstanding willingness to help out a fellow Wing rider fix the mess he created by not knowing not to leave the Wing in reverse when he parked!!

Glad I could help too !!!

I followed your suggestions as far as attaching the cables on the back of the engine which worked better however one cable seems again too short. I wondered when you activate the actuator which way does it rotate clockwise or counter clockwise? The n cable hooked up somewhat easily but the R cable ...

GoldWinergreg, can the lifter be removed with out the use of the special tool? I have only owned this bike for 4 months so don't know much history on it. It only has 32,000 miles so I wouldn't think the valves have been adjusted yet. On the left side, yes. A special tool is not needed to remove the...

GoldWingrGreg here from JustWings - GL1800 Specialty Service and Repair. Are they no longer available from Honda ??? Part #32. https://www.ronayers.com/oemparts/a/hon ... /muffler-2

Once the cables are out of their packages, I'm not able to tell the cables apart. Let's cover some bacic routing info. The reverse cable, 'R', is the one that attaches to the lower position at the back of the engine. It attaches to the front position at the actuator. The nuetral cable, 'N', attaches...

For anyone whom needs to know "the rest of the story," go here and click on the "3 associated documents." https://www.nhtsa.gov/recalls?nhtsaId=24V820000 Then scroll down, and click on the "Drive Gear Bolt on Crankshaft May Break" link. Then scoll down and click on the ...

Here some interesting info from dragonbird's post. So ... reading between the lines, the harder a 6th gen is rode, meaning more stress from throttle on, throttle off, the more likely the bolt will stress and break. I wonder if for the ones who've had their bolt break, if they ride in sports mode mor...

Honda makes a special tool that unscrews the tensioner, that also holds it in place, while the valves are being adjusted. However, on the left side and because there is no space restrictions, many small screw drivers can used for reinstallation. As for your leak, it really unusual that yours is leak...

Turns out the flasher was bad. Replaced it and now they work. The only problem is that pushing in the switch does not cancel the turn signal. I have to push it a bit to the opposite side. Is this a switch issue? Sorry I don't recall for sure, but your system might be associated to the spring inside...

Thanks for the post. We were looking forward to stocking them, but will wait for a wet weather report. At least for me, there is nothing worst then a lack of confidance in wet weather.

GoldWingrGreg here from JustWings - GL1800 Specialty Service and Repair. You might want to know that Champion Side Car went out of business a few years ago. There is a trike dealer in AZ that carries on; however, getting parts for a Champion made product is challenging. Keep in mind that our experia...

There they are. The 50th anniversary GL1800s. I'm expecting more info by 6th. Hopefully there is more then a couple of anniversary badges, and a badged key fob !!! Lane avoidance and addaptive c/c would be a nice additions.

Great video, and thanks for posting. It actually sounds like a bolt rolling around in the engine. Be sure to hang onto your paper work from that repair. Since we don't know what the campain/recall will include, and if it includes that bolt too, often there is a form that can be filled out, and Honda...

At least for me, I follow what Honda prints out. As stated in the Stop Sale notice, more info will be coming. But until then, there is nothing more to know. After working for manufactures like Honda, there is no reason to speculate on anything other than what their notices say. However, for many it ...

Try using a damp towle and a wet soft brush.

Just in ... this letter is starting to showup on FB.

Year ???

Any idea how long the Wing had sat for ???

Has the old gas been removed and new gas put in ???

Can you make a video of the noise, post it on YouTube, and copy and paste the link here ??? FYI, in the video,if you cannot hear the noise, neither will anyone else.

Thanks guys. GoldwingrGreg. The headlights should shut off when the start button is pressed unless the reverse button is in. Apparently some states require the headlights to be on when the bike is in motion. Silly as it is, reverse is in motion. I’ll look for the connector on the right side. Thanks...

Well, I got bad news from Sierra Electronics this morning. They said that my CB is not repairable. So, instead of sending it back and paying for shipping, they are going to dispose of it, whatever that means. It's a good thing that I found the other one. Just waiting for it to arrive now. I'm hopin...

Sorry ... I don't have a Service Manual in front of me. But I thought that the low beams shut off when the start button is pushed in. As for the location of connectors. A Honda Service Manual has pictures of those in either in front of, or behind the index. Sometimes it is easiest to go to the index...

are both relays the same part number because i am looking at 35860-mca-a61 and 35850-mca-61? or does it matter? Starter relays 'A' and 'B' have different part numbers. Another way to get power to the starter is jumping power to the rear cable on starter relay 'B'. That cable goes directly to the st...

If your rubber grommit on the main harness, that goes thru the front trunk panel is any good, I'd be willing to buy it ... please, please please

My 07 is getting a resto from the ground up, and that grommet it all cracked out.