Search found 6 matches

by PatrickB
Sat Nov 24, 2012 8:42 am
Forum: GL1100 Information & Questions
Topic: '83 aspencade question
Replies: 4
Views: 248

Re: '83 aspencade question

Check to make sure you have an 83 motor. My 83 Aspy has an 82 motor. The wire hook ups are not there.I only have the neutral like yours.
by PatrickB
Sat Nov 03, 2012 7:11 pm
Forum: GL1100 Information & Questions
Topic: cd repair discs
Replies: 4
Views: 172

Re: cd repair discs

Yes there is one. I bought one off of E-bay.Cant remember the name but came from England.Search GL 1100 Goldwing manuals on E-bay.You mite find.Hope this helps. Looked it up, seller is called bullyneck.
by PatrickB
Mon Oct 15, 2012 7:56 pm
Forum: GL1100 Information & Questions
Topic: 1983 GL1100A LCD problem
Replies: 6
Views: 166

Re: 1983 GL1100A LCD problem

I had a similar situation with my fuel gauge. I disconnected my battery to solder the 3 yellow wires by the battery.When I reconnected the battery my fuel gauge stayed on even with key out. I thought I did something wrong.I then disconnect the batt. ground for a few hours.When I reconnected everythi...
by PatrickB
Thu Aug 30, 2012 7:08 am
Forum: GL1100 Information & Questions
Topic: backfires at intervals of 1000 rpms
Replies: 3
Views: 144

Re: backfires at intervals of 1000 rpms

I would do a compression check.Had backfire when releasing throttle. Found two warped intake valves.Replaced and lapped all others, bike runs great now.
by PatrickB
Fri Aug 17, 2012 8:11 pm
Forum: GL1100 Information & Questions
Topic: 1983 apencade cooling
Replies: 2
Views: 73

Re: 1983 apencade cooling

Mine will usually kick on at 2 bars from top then drops it down to 3 bars.Im in Vegas at this time of year it definately works a lot. Hope that helps.
by PatrickB
Tue Aug 07, 2012 6:32 pm
Forum: GL1100 Information & Questions
Topic: Head Gasket? Or something more serious?
Replies: 5
Views: 150

Re: Head Gasket? Or something more serious?

There are 2 little O-rings on an oiler nipple inside where the the head meets the block.I would replace them.depends on which side, fuel pump O-ring.If you remove the water tubes under the carbs get those O-rings.I removed the water bracket on top of the head.Then you will need new gasket.I think th...