I tourman

Go on Youtube write this question GL 1800 how to remove the front wheel

the front wheel you remove the caliper, rear

the rear wheel no it stays in place

FlyBoy2121

I 1988

Go to see this vidéo, no problem for jack the bike

I GoldWingMen

The important thing is that the compression on all the cylinders must be less than 5 to 10 pounds between all the cylinders.
But has 5 pounds no problem.

FlyBoy2121

I cfennell1832

I have no video to offer you, but here is a slide show that you can watch.
I followed this method.

http://www.pbase.com/fredharmon/brakepads


FlyBoy2121

I toanogreen

Me on my Gold it is glued.

FlyBoy2121

I GoldWingmen

Here is the shelter I made for another bike that I had before my GoldWing 1800,
Unfortunately this shelter was too small for my Gold, I had to sell it.
These super shelters like this, these quickly open and close.
One or the other model you will be satisfied.

FlyBoy2121

I mudplug

I clean most switch, yes a green grease that hardened and which prevents from working well, I clean with a toothbrush and grease with silicone grease and all are well.

Example= http://www.pbase.com/fredharmon/reverseswitch

FlyBoy2121

I cfennell1832 If I understand your explanations the button on and off is breaking, if these ca you must change the switch that is inside. But if it does not stay pressed that you push it thoroughly, these the lubricant that keeps working because the fat is dry. Good to see this slide show, this is ...

I Big Tee I had the same problem last season, on the cover there are two U which are vicious on the cover and which is barred in the mechanism of the bottom, checks if the two U are very well vicious, me there was a U which was not tight. FlyBoy2121 My trunk will Not close on my new to me wing. Last...

I used this method when I changed my springs and fork oil.



http://www.pbase.com/fredharmon/forkoil


FlyBoy2121

I Garry and all the GolWingMen

I received yesterday the shim I ordered, and I installed the same day, today I made a ride with my wife, and I made a panic brake the GoldWing reacted well, A little dip but nothing serious, I find that my GoldWing its well behave.

FlyBoy2121

I Auggie I ordered a shim a week ago, and by the traking number have to deliver it to me today or tomorrow. FlyBoy2121 :mrgreen: I have been trying to order a ante-dive shim kit from Motomfg. Are they still in business? I have tried to order and also email them with no success. Any info on another c...

I Garry

I would secure the shock absorber U-piece which is pressed on the support of the creek, it would be better not to receive a part in face.
Because the U-shaped piece is aluminum, but it works well for him.

Next time

FlyBoy2121

I Garry

Here's what a friend of mine did, I found this a bit dangerous, but he had no problem doing the job.

FlyBoy2121

Allo !

I changed the two springs myself, and at the same time I changed the fork oil, I had coordinated the two jobs.

FlyBoy2121

I Auggie

I have to change for spring, ca work much better, it can absorb the drop of the road, you will not regret it.

FlyBoy2121

I Zorba
I settled this problem, I always hurt my back when putting the center stand, I installed a CRS center stand, fabulous have little even put it with the back of the bike.

FlyBoy2121

Hello
Why replace your left handlebars ???

FlyBoy2121

Hello to all the GoldWingmen

In the spring of 2018, ten years I have my Gold and 10 years that my candle iridium sound on my Gold, twice I verefy them and they are like new, a performance always equal all the way.
I recommend them

FlyBoy2121

I Jeff

On the GoldWing 1500cc yes there is an air compressor, but not the 1800cc.

FlyBoy2121

Did you have the reminder of Honda to change the read master cylinder ???????

For my bike they changed the master cylinder and change the brake fluid.

FlyBoy2121

Or you have this solution if it's plastic
FlyBoy2121

I scottybye

Here is what I suggest, if this thing is made of steel, try a magnet on an extention rod

FlyBoy2121

I Nitefuzz

If you look at the site of CycleMax without advertising, you look at a winshield for the 1500cc said from 1981 to 2000, and for the 1800cc have from 2001 to 2017.
I do not believe that you can interchange the two winshields.

FlyBoy2121

There is a lot of video on Youtube, here is one





FlyBoy2121