Hi Russell
Cheers thanks for that I will check.

Huntersbane.

Bloody hell. Is almost the same colour as mine too... well done. I'm using my mates Garage...but a tent would be fine.

Get a bit of heat in there for when you are working bud... Thanks for the contact

Hi candt79. At the Carb connection where you connect the grommet at the Longer (out the cable sleeve) end of the cable. I am pretty sure "Originally" there was a small Spring, I know for a fact that this is missing, when I purchased a new cable 3.5 years ago as the original snapped at the ...

Hi. Engine is back in after a 3 year absence lol... Carbs are in, but on checking the throttle linkage all seems OK. Cable is free from obstruction but when I open the throttle and release. Its not returning to the shut-off position. I do seem to remember having a small spring on the throttle cable ...

"ITS ALIVE" :geek: I say that a lot. That's a whole story on it's own. I read on the forum someplace. Another member summed it up with "You can pay up front and buy a new motorcycle or you can buy an old one and pay as you go". No getting past the pay part unfortunately. I think...

Well $7000 is not too bad at all. Should be looking and going great. The unfortunate thing about wings is the Longer you keep em, the faster, that $7000 starts creeping up to my £31000. Lol... its all relative.... Playing Putty-Back-Together on Monday 15th July 24, so will take some Pics too...just ...

Err unfortunately my Budgeting skills are the same as yours. Bought mine for £2000 some 9 years ago, after a year had the 3rd 4th gear death rattle 4th eventually gave up the Ghost.... so had it rebuilt, while that was happening I purchased another engine from a 1990 machine with heads, starter and ...

Not sure if these are what you are talking about? Different colors? IMG_0472.JPG One is the temp sensor in the thermostat housing and the others are for the fan switch on the left radiator. If those aren't the wires in question I can show the rest of them to you for another guess. I have that old e...

Hi all Been a long time since I have posted. Question re wiring. After I had the 1500SE engine rebuilt a moved abroad for three years, and decided to get the lump running again. Engine is now back in the frame with Start, Alt and heads all reinstalled. My question is "From the front of the engi...

OK thanks for the advice.

So its a full transmission, Seals, Bearing and Gaskit Kit. Think I should change the clutch too. make shure in my life time no more Engine-Outage. LOL

Any one have the 96 part numbers please.

Thanks

Huntersbane.

Hi All Well after 6 Months with the Death Rattle in the Transmission. I Left 4th Gear on a roundabout near Carlisle in the UK. So put a older (greater mileage) engine in her its ok but not the the Original and a bit slower. So I am splitting the Engine and replacing 4th gear, and advice would be gre...

Your query doesn't specify whether you're looking for a controller to work multiple modes on a single color LED system, or a multiple color system. In either case,Joe Florida's controllers will handle 1,000 LEDs all day long. You'll want this unit if you're running RGBs. It is also good for customi...

wingpilot96 wrote:try superbrightleds.com they have a bunch of LED items

https://www.superbrightleds.com/cat/rgb ... ntrollers/

Thanks WingPilot96.

Had a look on the site and have a few ideas fromm that,

Thanks for your time.

Cheers


Huntersbane

Wired mine to the Sidelights (Led's too) works for me. that was 6 months ago. Stimm going strong

Hi All :?: I have been trying to get hold of a Remote Controled Multi Flasher unit for my Accessory "Light Show" Lights (At the Moment - Static LED's) 1) Can anyone point me at a good site to get this. Or 2) Anyone have one for sale. Or 3) I do have a few "2" so I may have to lin...

OK Thanks everyone.

Thats another GL1500 engine for me then.

Why the replacement!!! Because its cheaper to replace than get fixed I understand!!. About £1500 Labour to get the job done and about £700 parts. about £1000 to £1200 for a replacement. As I paid £2500 for her about 18 months ago and had a re-spray and service at £3500, sinse then about another £100...

Hi All As I am looking for a replacement engine for my GL1550 (1991) with 63k Miles and "NO" 4th Gear, I have been looking on Ebay (UK) with very little luck Some are for sale but a 1988 or 89 seems a bit silly to buy for £900 and over. I was just wondering if a 1999 99 00 01 Honda Valkyri...

Yes thats normal . I mean when brake is applied its constant positive. So no flashing/pulsating. Cos the cable is still attached to the original brake feed .

Hi Again WingRider93 Sorry but I think you still have a positive feed from your original Green\yellow cable.!!!! When you splice the two cables from the Controller/Modulator (in my case Red and Yellow-- May have said blue in my Original post) you are supposed to sever the Green\Yellow cable between ...

Sorry mine were Kahtec from http://www.flashingbrakelights.co.uk/Mo ... ducts.html

Works brill.
I have attached a diagram, showing my installation

Hi All Well had the death rattle on 4th for some time now. But on Saturday, (going to Kirkbride Drove to Drink Rally from Southport) Lost 4th gear totally... So its a replacement engine search, any one have any ideas, as to where i could get one fro a 1991 1500SE. I know there is one on e-bay but be...

Hi. WingRider93 I have just installed one myself, on my 1500 SE, and it works fine. Is it the Controller in a sealed black box. I purchesed a So Called Kit vesion for 12 Quid each and not one worked when I soldered it all together and Im a PC engineer, that fixes motherboards.... Just to be sure, di...

Err Found it.... it was a 15amp fuse (Tail) light fuse. Is that normal. No ignition lights No Any lights and the starter would not turn over... All because of a tail light fuse???????

Hi all. After lying my wing on her offside (on carpets) I changed my Brake Disk as instructed by my garage after the MOT. During the rebuild of the back end I noticed one brake light was hanging out and the earth wire was hanging loose (this was a problematic holder and I had purchased a new one. So...