My 1500 started doing the sane thing at about 2200 to 2500 when I replaced the alternator with one made in China. Got the OEM rebuilt and put back on and problem gone.

I have a 2008 gl 1800. Is there a way to connect a female USB port to the aux audio cable in the left front pocket so l could play music from a thumbdrive (flashdrive) connected to it If you've installed a power port, and get one of those adapters the fits into the power port for power, but the fac...

Thanks for the replies. I am very electronically challenged so it was just a thought.

I have a 2008 gl 1800. Is there a way to connect a female USB port to the aux audio cable in the left front pocket so l could play music from a thumbdrive (flashdrive) connected to it

2000 GL1500 SE ~ 40,000 km I have a buzzing sound and vibration that seems to be coming from the engine area when the motor is lugged and working hard Eg: accelerating in a gear too high or when climbing a hill. It’s not a metallic sound - almost sounds like vibrating plastic and it buzzes the foot...

They sound good if like you say not in a hurry. I sent them a email a month ago and haven’t heard back. I will try to get a contact number and give them a call. Thanks for the info

Anyone in south florida had any service done at http://onwingsofgold.com in Brandon Fl. Looking for recommendations

That looks like it is leaking from your crank main seal. That's what's underneath that cover. In which case, your timing belts are likely contaminated with oil as well. Remove those three bolts and pull that round cover off, it will reveal the crank pulley. See if you can view oil on the case insid...

Thanks for the advice and comments. Had the hip done in May and was back to riding in July then in Oct. I had rotator cuff surgery and now i'm in Florida for the winter and riding almost every day and doing great.

That looks like it is leaking from your crank main seal. That's what's underneath that cover. In which case, your timing belts are likely contaminated with oil as well. Remove those three bolts and pull that round cover off, it will reveal the crank pulley. See if you can view oil on the case insid...

Check the pictures and hopefully give me a clue to where the leaks are coming from

Still looking for that leak

Engine oil leak on 1990 gl 1500 on the front of engine around the water pump. Drips hang on the bottom of water pump. Nothing coming from weep hole and oil filter not leaking. Any info appreciated

Neat job. looks great.

tim phelps wrote: ↑Sat Dec 14, 2019 7:29 pm where in ky do you live?

Hello Tim, I live in Grayson, 100 mi. east of Lexington on I-64.

CrystalPistol wrote: ↑Fri Dec 13, 2019 11:53 pm Those extra wide "wings" on the lower half will just curve forwards on the bike and provide a hair more support for co-rider at the sides. It'll work fine.

Ok, Thanks a bunch. Its looks a lot more comfortable.

Will these interchange ?

Need some help here. I have a 1990 Goldwing 1500 SE and l want to replace the entire seat with a OEM seat and passenger backrest that fits 98-2000. Dimensions are 17 1/2" wide. Are all gl 1500s the same width between rear speaker housing?
Thanks in advance.

No to all the above Trike has 28000 mi. I guess l better get some maint issues taken care of. Thanks for your response

2008 Goldwing/Roadsmith trike starts good runs great until you stop for rest break or to get fuel then on startup with engine warm it acts as if it is loading up on fuel and will die if engine is not revved once back on the road it runs fine. I have run quite a bit of sea foam but no help. thanks in...

Looks like it won't fit my 08. didn't think there was a difference 01-17

Do you have pictures

Wishing you continued improvement

Sounds like that knee went well for you. Enjoy the ride

Sounds like you are one that it didn't back off. I'll be glad in the event that I can simply be versatile without agony in 2 wks. This knee has truly kicked my tail however the hip got so awful I needed to stop treatment on knee so I don't have a clue how great the knee is until I get the hip I am ...