Search found 324 matches

by guitarzan
Mon Oct 14, 2019 5:18 pm
Forum: GL1500 Information & Questions
Topic: Passenger Floorboards Question
Replies: 4
Views: 149

Re: Passenger Floorboards Question

I'll have to take a look and see what those hooks connect to. I have to say that when I look at the whole unit, it perplexes me.

Thank you WinggAdmin and DougEFresh

Frank
by guitarzan
Mon Oct 14, 2019 12:30 pm
Forum: GL1500 Information & Questions
Topic: Passenger Floorboards Question
Replies: 4
Views: 149

Passenger Floorboards Question

Hello, I'm at the point that the adjustable passenger floorboards on my 1994 Goldwing SE 1500, but I don't know what these (I'll call them clips) are for, there are two of them on each of the floorboards, one of the clips appears to be broken or smashed. My question is, what are they, what do they d...
by guitarzan
Wed Oct 02, 2019 4:52 am
Forum: GL1500 Information & Questions
Topic: What is this for
Replies: 3
Views: 228

Re: What is this for

And you'd be right. I didn't want to assume that was the case, a member sent me a private message offering help along with his phone number for another question and last night we were texting and he told me the same thing and the cable is snugly setting in it now.

Thank you much sir

Frank
by guitarzan
Tue Oct 01, 2019 9:22 pm
Forum: GL1500 Information & Questions
Topic: What is this for
Replies: 3
Views: 228

What is this for

The brass colored clip comes out in the area of the right passenger storage pocket. I don't know what it is or what it's supposed to be for? I'm ready to lower the bags.

Any ideas guy's
Thank you
Frank
by guitarzan
Mon Sep 30, 2019 10:37 pm
Forum: GL1500 Information & Questions
Topic: Won't turn over
Replies: 10
Views: 281

Re: Won't turn over

Oh ok, So that's it. It's bolted to the bike. I'm going to take a picture tomorrow ot this black rectangular thing with what looks like a wiring harness hanging just to the rear of my right shock absorber, it looks like it's just hanging there, I can grab it, but then again the bags are still up. Th...
by guitarzan
Mon Sep 30, 2019 8:42 pm
Forum: GL1500 Information & Questions
Topic: Won't turn over
Replies: 10
Views: 281

Re: Won't turn over

I'm going to look in the manual to see what it looks like.

You guys are the best.

Thank you
Frank
by guitarzan
Mon Sep 30, 2019 1:08 pm
Forum: GL1500 Information & Questions
Topic: Thin washers
Replies: 9
Views: 208

Re: Thin washers

Erdeniz Umman wrote:
Mon Sep 30, 2019 11:18 am
This picture in the service manual may help for the torque value.
Hello Erdeniz,
That's going to help me a lot, I appreciate that you helped me.

Thank you
Frank
by guitarzan
Mon Sep 30, 2019 11:36 am
Forum: GL1500 Information & Questions
Topic: Thin washers
Replies: 9
Views: 208

Re: Thin washers

When I took the air hose off the air shock, I thought that the washers were missing, so in reality they were never there and I've been looking for something that doesn't even belong there..........oh Brother

Thank you again

Frank
by guitarzan
Mon Sep 30, 2019 11:06 am
Forum: GL1500 Information & Questions
Topic: Thin washers
Replies: 9
Views: 208

Re: Thin washers

For some reason I thought that those washers were just really thin copper washers. I looked on Partzilla but under rear shock absorber and diagram showed the washers but the number for that line item wasn't even listed. Thanks guys. Oh anyone know what the torque value is when tightening this to the...
by guitarzan
Mon Sep 30, 2019 8:53 am
Forum: GL1500 Information & Questions
Topic: Thin washers
Replies: 9
Views: 208

Re: Thin washers

Thank you. I'll take the part with me to see if the thin washer will fit.

Thanks
Frank
by guitarzan
Mon Sep 30, 2019 1:21 am
Forum: GL1500 Information & Questions
Topic: Won't turn over
Replies: 10
Views: 281

Re: Won't turn over

Thank you,
I've been trying to lower the bags but it's taking me a while because of locating certain fasteners in my garage.

Thanks again
Frank
by guitarzan
Sun Sep 29, 2019 7:31 pm
Forum: GL1500 Information & Questions
Topic: Thin washers
Replies: 9
Views: 208

Thin washers

Hi I have a 1994 Goldwing SE 1500 and I'm missing those thin washers that go on the connection where the air line connects to the right shock, one before the fitting and one after the fitting. I see partzilla doesn't even have it listed. Does anyone know where I can order them from, I wonder if I ca...
by guitarzan
Fri Sep 27, 2019 12:45 pm
Forum: GL1500 Information & Questions
Topic: Engine Hanger Bolt
Replies: 4
Views: 164

Re: Engine Hanger Bolt

Hello,
Once again your help is really appreciated, after all this time I just may be able to ride some before winter.

Thank you much

Frank
by guitarzan
Wed Sep 25, 2019 9:26 pm
Forum: GL1500 Information & Questions
Topic: Won't turn over
Replies: 10
Views: 281

Re: Won't turn over

I'm tempted to go out to the garage and try it now,.
Thank you DenverWinger

Frank
by guitarzan
Wed Sep 25, 2019 8:52 pm
Forum: GL1500 Information & Questions
Topic: Engine Hanger Bolt
Replies: 4
Views: 164

Re: Engine Hanger Bolt

Hello AZgl,
Thank you again, great chart. You saved me and the bolt.

Frank
by guitarzan
Wed Sep 25, 2019 8:45 pm
Forum: GL1500 Information & Questions
Topic: Won't turn over
Replies: 10
Views: 281

Re: Won't turn over

Hi bluthundr, I have a new battery but checked the voltage as you suggested and the voltage registered 12.8. I knew that there is some kind of sensor or switches that could be affecting the starting. Do you know off hand where it's located? I'll turn the mufflers out and lower the trunk/bags and see...
by guitarzan
Wed Sep 25, 2019 5:04 pm
Forum: GL1500 Information & Questions
Topic: Engine Hanger Bolt
Replies: 4
Views: 164

Engine Hanger Bolt

Hello,
Does anyone happen to know the torque value of a engine hanger bolt? I have a tendency to snap bolts.


Thank you
Frank
by guitarzan
Wed Sep 25, 2019 2:45 pm
Forum: GL1500 Information & Questions
Topic: Won't turn over
Replies: 10
Views: 281

Won't turn over

Hi, I've been working on my 1994 Goldwing SE for, well let's just say longer than I should have. I wanted to start it and use some carburetor cleaner while it was running. My thought being that while I have all the Tupperware off it would be a good time to do it. Is there any reason why it shouldn't...
by guitarzan
Mon Sep 09, 2019 4:40 pm
Forum: GL1500 Information & Questions
Topic: What's the difference?
Replies: 5
Views: 219

Re: What's the difference?

Not a problem my Northern neighbor. Thank you for having a good soul.

Thanks
Frank
by guitarzan
Mon Sep 09, 2019 1:33 pm
Forum: GL1500 Information & Questions
Topic: What's the difference?
Replies: 5
Views: 219

Re: What's the difference?

Thank you much. I want to look onto it some more.

Thanks
Frank
by guitarzan
Mon Sep 09, 2019 12:47 pm
Forum: GL1500 Information & Questions
Topic: What's the difference?
Replies: 5
Views: 219

What's the difference?

Hello,
Can someone please explain to me what the difference is between a 1994 Goldwing SE 1500 A and the Goldwing SE 1500 Ac ?

Thank you
Frank
by guitarzan
Tue Aug 13, 2019 12:33 pm
Forum: GL1500 Information & Questions
Topic: Aux. fuse block
Replies: 7
Views: 1351

Re: Aux. fuse block

Thank you again, I appreciate the information and you taking the time to inform me.

Frank
by guitarzan
Thu Aug 08, 2019 5:50 pm
Forum: GL1500 Information & Questions
Topic: Aux. fuse block
Replies: 7
Views: 1351

Re: Aux. fuse block

I have an auxiliary fuse block. I want it to power up when I turn the key on, and to power off when I turn the key off. The directions say to hook the blue wire to the taillights, but I'm wondering if anyone knows of a place closer to the battery that would be easier. Would connecting the blue wire ...
by guitarzan
Thu Aug 01, 2019 11:07 am
Forum: GL1500 DIY Articles
Topic: How to bleed or flush your clutch
Replies: 33
Views: 32589

Re: How to bleed or flush your clutch

CoachP7,
That's a real clear and informative post that you wrote. I have a 1994 SE and I love it.

Thank you
Frank
by guitarzan
Tue Jul 30, 2019 11:57 am
Forum: GL1500 Information & Questions
Topic: 1993 gl1500A water pump
Replies: 12
Views: 1476

Re: 1993 gl1500A water pump

Hi Joe,
Thanks for the advice, I'll torque them down.