Rambozo wrote: ↑Fri May 13, 2022 9:26 pm Why not just get the real ones from Honda?
90541-371-000

Nice part number. Too Bad I was not talking about the Grommet Buttons leaking Rambozo, but, nice try and Thanks for the good attempt. I need the Cover Gaskets not the button gaskets.

Nah. The 1500 caliper will fit but the bracket is different. Use your bracket and toss the 1500 bracket. The 82 has 30mm pistons all around. The 1500 is 33 mm if I remember correctly. Yea, I had to do this to my 82 as well. My shop partner went berserk and ruined my old one. I nearly punched that ol...

Well y’all that little read was nicely informative, however, stoooooopppiidd me bought a really good set of those Show Chrome valve covers and the oil leaking was driving me mad. So, not that I could find it here, but, seems them @&$*^%# covers are well known leakers and I DID have to use RTV se...

Is ABS going to be difficult or impossible to find soon? I started gathering my needed ABS items for the trunk rack reinforcement and was quickly thrown for a surprise. Stopped into LOWE's in Loganville, Ga. and asked for ABS pipe & cement. Sorry, we don't carry ABS anymore. I checked the plumb...

Ah and as I read your reply I thought of all the gentlemen that pioneered the way, Tesla, Edison, and many more.
I love to talk about ohms, mohs, henry's, farad's, and LSI Integrated chips and there uses. Fascinating really..........but ya can never STOP learnin.........at least in this field.

would not be as spectacular as you think. it would happen in a microsec and if you blink you miss it. I do not know of any powerplant that outputs a million volts. just doesnt exist in reality. And I also witnessed a 35.5 KV buried vaporize a person standing at the top of the hole when it blew. The ...

F*** it BUY AMERICAN............keep an american working making HIGH QUALITY goods. There are other MC Lifts that are made in USA and cost roughly 300 bucks more. BUT far superior lifting capabilities and not a scissor type lift. BLACK WIDOW Black Widow ProLift Extra-Wide Air/Hydraulic Motorcycle Li...

UH yea, I misread it. :facepalm:
10,000 Watts would require a #6 wire and would instantly melt a hair strand wire under that full load. Just sayin.

I have them on my GL1100 but the first set i ordered from slamazon had a crack right in the middle of the bend. Sent em back and ordered from a different supplier. Those look really good just check for leaks from stem before full inflation perhaps? DO NOT buy the Ebay crap someone posted, pure junk ...

Thanks guys, I really do appreciate all the advice! I didn't order the trace repair pen, I decided to do as WingAdmin & Rambozo advised & just expose the trace & solder a small wire in it's place. I do need one more bit of advice though...Do I need to protect the said repair by putting ...

On the other hand, you could push a million volts through a wire the thickness of a hair, but only at an extremely low current. Wire the thickness of a hair could easily stand 10mA current, but that would still be 10,000 watts! :!: :idea: Not Quite there tuff guy. 10mA is milliAMPS or .01 A NOT 10,...

ok so what I was afraid happened did happen - the female end of the bleeder screw in the caliper is stripped. Not totally but I fished out some aluminum shavings from inside and the bleeder screw now doesn't tighten all the way. So it's a shot caliper I guess. BUT, I've got a spare caliper from an ...

We all have friends that have "tried" something, but, "his last model goldwing" does not address the specific model I inquired about. Loads of people darkside their 1500 and 1800 and I was wondering if anyone had done it on a earlier model. I appreciate your input, as useless as ...

Anyone running a Car tire on there 83 GL1100?

Wow, finding a rear tire that "LASTS" longer than 5-7K would be huge. :facepalm: I see this is being done on the 1500 and bigger, but, would it work on a 83 GL1100A or I?

Gee, I AM now confused. Is the bike SOLD or For Sale? I cannot come before Thanksgiving, but, I am interested.

Is this sold yet? Please PM me if it is available.

Awesome Info. Thanks all.

Very Interested, and would like more photo's please. PM me if you like.

JC Whitney sells an EMGO replacement ignition switch. It works for the GL1200, looks like it is perfect fit for the 1100 as well. http://www.jcwhitney.com/emgo-custom-fit-replacement-ignition-switches/p2002174.jcwx?filterid=d58391y1984j1 GRP-12174g_is Well JC Whitney has been taken over by carparts...

Ya just gotta love "Hillbilly Engineering". And it works GREAT............ The issue I have with using BB's is the neck of my tank does not even allow liquid to be drained 100% and the "tank" does not have a Fuel Level thingy to be able to remove on the bottom to open it up bette...

Wow, Found my voltage regulator as I was taking about the instrument cluster to check things out. Ya not gonna believe what I found. Some ingenious person decided to install a 158 bulb inline with the Temp Coil. Only reason I figure is cause that part of the control module was flaking out and it hel...

All great info. Dang I like the milkstone magic. Just bought some and overnight soaking in a rusty tank... first thing in the morning drain and flush..........and I expect fabulous results. Ol CB750 Gas tank cleaner......

Glad you are on the way! What did you end up making your phone ring out of? I was going to use some Window and Door foam and just super glue the ends together since it's basically just an oil mist collector. I am having a hell of a time getting my main seals to seat, even using a split pvc driver t...

Thanks for the Pic and info Sig. Nylon Washer, interesting, maybe I can come up with something for that. I already made a foam ring. Much Appreciated !!
This site is sooooo Awesome. Thanks for the help and info. You Rock !!