Search found 259 matches

by kane67
Sun Oct 21, 2018 1:43 am
Forum: GL1500 Information & Questions
Topic: Getting a 93 Aspencade running after 4 years sitting
Replies: 120
Views: 5118

Re: Getting a 93 Aspencade running after 4 years sitting

Found this in https://goldwingdocs.com/forum/viewtopic.php?f=14&t=19833 Not sure why on some bikes there is just enough clearance to easily maneuver it free, and on others, the frame is in the way. In any case, some owners have had to remove a couple of the frame-to-engine mounting bolts, then gentl...
by kane67
Tue Oct 16, 2018 12:35 pm
Forum: Product Reviews
Topic: Randakk's High-Performance Fuel Filter
Replies: 49
Views: 5621

Re: Randakk's High-Performance Fuel Filter

Hopefully these tiny filters under float valves do their job...


by kane67
Sun Oct 14, 2018 11:22 pm
Forum: GL1500 Information & Questions
Topic: Radio mute by itself...
Replies: 12
Views: 403

Re: Radio mute by itself...

That would be a good thing to check if there is cb ;)

In my case, non-cb wing.
by kane67
Sun Oct 14, 2018 12:59 am
Forum: GL1500 Information & Questions
Topic: Radio mute by itself...
Replies: 12
Views: 403

Re: Radio mute by itself...

Again mute returned by itself, took off radio and finally found the reason (I hope). 4E42E43C-2F77-4014-953E-BD3E5BA5F0CD.jpeg White wire was the cause, I don’t know its purpose/function but I replaced it and no mute anymore when I wiggle these wires. Maybe somebody radioguru could tell what that wi...
by kane67
Sat Oct 13, 2018 12:13 pm
Forum: GL1500 Information & Questions
Topic: Not a Good Day at the Gas Station (need a part)
Replies: 14
Views: 600

Re: Not a Good Day at the Gas Station (need a part)

Has it been easy to get paint with code yr149m? Here in a shop I`ve been buying spray, they don’t have books for the recipe (yr149m) for Honda MC’s age 80’s. So they have made it manually, I have showed sidepanel. Then last time there were older guy behind desk and he said let’s look old Honda cars ...
by kane67
Sun Oct 07, 2018 11:49 pm
Forum: GL1500 Information & Questions
Topic: Transmission problem 1500 SE
Replies: 12
Views: 350

Re: Transmission problem 1500 SE

I have noticed that using Mobil super 2000 10w-40 (semi synthetic) is much better for my transmission than any other motorcycle oil I’ve had. Much better shifting cold & hot.
No friction reducers...
by kane67
Sat Oct 06, 2018 2:23 am
Forum: GL1500 Information & Questions
Topic: fuel, ignition or worse peoblem?
Replies: 20
Views: 490

Re: fuel, ignition or worse peoblem?

Great!!

I replaced all vacuum hose lines one by one; orange, green, blue, red, yellow and all carbs white hoses.

br, kane
by kane67
Fri Oct 05, 2018 11:30 am
Forum: GL1500 Information & Questions
Topic: fuel, ignition or worse peoblem?
Replies: 20
Views: 490

Re: fuel, ignition or worse peoblem?

Any updates on this? Well, I don’t know really how it would act. I have just tested how it behaves (idle) when vacuum is missing. I replaced all hoses three years ago (first winter maintenance) after reading all possible hints&tips to update an old 1500 wing :) Since then wing is been ok. I just mad...
by kane67
Tue Oct 02, 2018 11:17 pm
Forum: GL1500 Information & Questions
Topic: fuel, ignition or worse peoblem?
Replies: 20
Views: 490

Re: fuel, ignition or worse peoblem?

If you follow that vacuum line from ECU, you should find a t-connected short vacuum hose in that ORN line. It has a plastic plug what you can remove. I don’t know if this is originally made for service. It is somewhere visible in right side. While back I tested mine and removing vacuum from ICU (88-...
by kane67
Tue Oct 02, 2018 11:45 am
Forum: GL1500 Information & Questions
Topic: fuel, ignition or worse peoblem?
Replies: 20
Views: 490

Re: fuel, ignition or worse peoblem?

Check ORN vacuum line that there is vacuum to ECU.


by kane67
Sun Sep 23, 2018 3:25 pm
Forum: GL1500 Information & Questions
Topic: Radio mute by itself...
Replies: 12
Views: 403

Re: Radio mute by itself...

Went for a ride today, about one hour. Kept radio singing :D
No Mute by itself, buttons Mute and frequency works perfect!
by kane67
Sun Sep 23, 2018 2:49 pm
Forum: GL1500 Information & Questions
Topic: Fork Oil Change
Replies: 14
Views: 328

Re: Fork Oil Change

When I refurbished completely my OEM front forks 2 years ago, I made diy removal tool, drilled holes to caps and made threads and placed screws with seals. Now it is super super easy to change fork oil ;)

Maybe I should move to Progressives, at the moment I don’t know what I’m missing :D
by kane67
Sun Sep 23, 2018 5:19 am
Forum: GL1500 Information & Questions
Topic: Radio mute by itself...
Replies: 12
Views: 403

Re: Radio mute by itself...

I put fresh layers of thermal paste and soldering iron a bit to connector’s feet (IC board).
Seems to work perfect, I’ll update this topic if ”automute” returns...
by kane67
Sat Sep 22, 2018 2:00 pm
Forum: GL1500 Information & Questions
Topic: Radio mute by itself...
Replies: 12
Views: 403

Re: Radio mute by itself...

Getting closer... While testing covers off, I pushed this wire set towards IC board and mute went off. Moving back and forth caused mute on/off. Next I need to get tube of thermal paste for IC’s. 3D85688C-AE40-4C70-AB7A-A07015ED0463.jpeg 20E0D379-81C0-4893-BFA5-9460DB06D566.jpeg Board connector look...
by kane67
Sat Sep 22, 2018 10:03 am
Forum: GL1500 Information & Questions
Topic: Radio mute by itself...
Replies: 12
Views: 403

Radio mute by itself...

Ok, started to mute itself, frequency buttons not working when shows Mute. Disconnected C21, tested buttons like manual says and they all work. So no sticking buttons. Followed black/green to deck connector. Continuity C21 to deck connector (black/green) ok. Black/green is ground from radio, right? ...
by kane67
Wed Sep 19, 2018 11:52 pm
Forum: GL1500 Information & Questions
Topic: GL 1500,89
Replies: 11
Views: 311

Re: GL 1500,89

One note, it is good to check how accurate your trip meter is (if you follow that to calculate consumption) I have US wing, but after checking miles on trip meter vs actual with gps, one mile in trip meter is 1.51 km in my wing. NOT 1.61 km like it should be by the books :) Usually I get 6-6.6 litre...
by kane67
Tue Sep 18, 2018 11:33 pm
Forum: GL1500 Information & Questions
Topic: Windshield garnish, replacement has less radius...
Replies: 4
Views: 170

Re: Windshield garnish, replacement has less radius...

Hi!

I have noticed on my wing that there are extra large washers (by PO) under front tab part, so it moves garnish a bit forward. Then it needs to be pressed left and right to mount mechanism.
I have no experience how original seats but I believe a way much better...
by kane67
Thu Aug 30, 2018 11:26 pm
Forum: GL1500 Information & Questions
Topic: Choke on by mistake... broke few plugs
Replies: 3
Views: 187

Re: Choke on by mistake... broke few plugs

My wing seem to be sensitive :D If I leave choke on a bit, it kind of backfires in the exhaust. Always done that. Usually I can keep choke on less than 30 sec. I had an issue of too rich float level 1 1/2 month ago (made by myself :lol: ), maybe that already effected to plugs... I could try NGK Irid...
by kane67
Thu Aug 30, 2018 11:45 am
Forum: GL1500 Information & Questions
Topic: Choke on by mistake... broke few plugs
Replies: 3
Views: 187

Choke on by mistake... broke few plugs

Yesterday I was in mc meeting for a cup coffee :D Before leaving, I rised windscreen. I must have pushed choke on about 1cm... I drove highway about 10km, stopped at traffic lights and noticed how poor it was idling. Well, pulled over and finally noticed the choke was on. Set it off but idle was not...
by kane67
Tue Aug 28, 2018 11:22 am
Forum: GL1500 Information & Questions
Topic: New Member
Replies: 5
Views: 304

Re: New Member

Welcome!

Hopefully you get your Wing!!

Meanwhile, you’ll find a HUGE amount of information and stories here.

br, kane
by kane67
Thu Aug 23, 2018 11:49 pm
Forum: GL1500 Information & Questions
Topic: GL1500 Rear wheel bearings
Replies: 4
Views: 171

Re: GL1500 Rear wheel bearings

Remember to do it like manual says, first single bearing to bottom.
Then distance collar between and double bearing as deep it goes.

viewtopic.php?f=6&t=44743
by kane67
Thu Aug 23, 2018 5:05 am
Forum: GL1500 Information & Questions
Topic: Question about carburators
Replies: 10
Views: 269

Re: Question about carburators

Pic from web...


by kane67
Sun Aug 19, 2018 2:37 am
Forum: GL1500 Information & Questions
Topic: cannot hold rpm at 1k
Replies: 22
Views: 604

Re: cannot hold rpm at 1k

Did you check idle jet size? Has it been updated, recall http://www.goldwingworld.com/pages/sb2.pdf How much pilot screws are open? Mine had original setup, I updated #50 jets to #55. I keep pilot screws open 3 1/8 turns. Carb ventilation updates are done (tubings). http://www.goldwingworld.com/page...
by kane67
Sat Aug 18, 2018 12:22 am
Forum: GL1500 Information & Questions
Topic: Yet another cruise control issue...
Replies: 4
Views: 188

Re: Yet another cruise control issue...

94 model use vacuum...right?
This may give an idea where to check...
viewtopic.php?t=10213
by kane67
Wed Aug 08, 2018 12:20 pm
Forum: GL1500 Information & Questions
Topic: I don’t know what changed... rear wheel bearings
Replies: 5
Views: 251

Re: I don’t know what changed... rear wheel bearings

Manual says, first single bearing to bottom. Then distance collar between and double bearing as deep it goes.
Maybe bearings were done first dual / second single. It aligns wheel different/wrong.

Driveability is now absolutely excellent :D