It really seems to me that it is a whole lot of work and trouble just to bypass what Honda has installed and has a proven track record. The OEM Auto Fuel Shut-Off valve works really well, needs no power and it easily rebuildable. It seems to me that leaving things stock is a better idea but that is...

All I can do is tell you that the shut-off valve is still working fine, with no problems so far. Sounds like it would be an good solution to the problem you described.

I recently changed all my lighting over to LED and encountered the same problem............I did not want to add the resistors as I have an Interstate model without cruise control.............I installed an automotive flasher relay and modified it by removing a trace on one of the circuit pins on th...

Which brings up a good point regarding space behind the light.............I bought some elcheapo lights on ebay..........$20 for two lights and they had fans.............I had to bore a large hole in the fairing behind the left lamp to make sure it had plenty of air for circulation...........I was s...

Thanks for the reply and the video link...........I had watched it previously and it was my inspiration to add something similar to my trike........I plan on using the Pro Mini or maybe the Nano...........I really like what you have done, not being a programmer by trade I struggle at best to get thi...

My list of items to install is a power port, USB port, voltage gauge, temperature gauge, transmission gear indicator, a 3.5'" screen display for use with Arduino microcontroller, rocker arm switch for powering the display items off and on, plus a arm attached to the panel for my phone to use as...

My list of items to install is a power port, USB port, voltage gauge, temperature gauge, transmission gear indicator, a 3.5'" screen display for use with Arduino microcontroller, rocker arm switch for powering the display items off and on, plus a arm attached to the panel for my phone to use as...

I have a 1992 GL 1500 Interstate model and if it didn't come with these lights then someone added them...........they did not work when I bought the trike..............I just recently discovered in the service manual wiring diagram that there were connectors in the area of these lights for a relay a...

I will be doing that now that I know how easy it is to glue something to the cover..............thanks

While working on my trike, I placed the right side cover in the back seat.............after fixing things, I decided to go for a ride.......you've probably already guested it, I forgot about the side cover in the rear seat............a short way down the street I heard the sound of the cover flying ...

Interesting............someday I will try the custom fiber glassing approach.............thanks

Yes, the warning lights can be seen over top of the panel...........there is still room enough to lower the panel if necessary and the other option would have been to build a totally flat panel.............good point about not being able to pass an inspection, I don't have that problem, no inspectio...

You lay your wrist on top of the panel and the hand falls naturally on the key...........not uncomfortable at all...........thanks

I posted a DIY project in early October and have gotten zero comments.............was just curious as to what people thought of the auxiliary panel that I made for my bike...............170 views and no comments............I guess nobody liked it, not that I'm heart broken, just curious as to what p...

Any chance you would have a picture of the break...........I checked mine out as best I could, kinda hard to see in the space where the ladder bars attach to the front..............I did notice that on the right side there was 0.010" clearance between the ladder bar pipe and a weld on the bike ...

I ended up using a short 1/4" large screw head bolt with large washers on either side of the hole.............holes are behind the seat and not visible.............

Thanks, I'm going to check mine out and see what I have...........will let you know if I see any problems with mine.

Reread your post......not sure what ladder racks are............I was referring to ladder bars on the rear end which holds it aligned with the pivot point...........thanks

I have 1992 Goldwing 1500 with a Motortrike conversion..............I have only had the trike for two years put 10,000 miles on it and it currently has 65,000 miles........I am curious as to how and where the ladder bar is breaking............do you have a picture of what failed..............just cu...

Success!!.......................I ended up using the method which required drilling holes in the back of the trunk and then using a long reach screwdriver. I just posted a DIY article on this adventure that will hopefully help someone else who does not realize the pearls of taking off the latch plat...

This article deals with trunk latches that are mechanically jammed. This article is on a 1992 Goldwing 1500 Interstate trike conversion. How can this happen?.............by removing and replacing the latch cover plate so that the latch release rod is on top of the latch pulling tab. When might this ...

Thank you, thank you, thank you..............that's exactly what I was looking for...........will report back on my attempt to open the trunk............thanks to everyone for their help

Thanks again for the replies............IF YOU EVER REMOVE the LATCH COVER then you need to be sure to reassemble the latch cover correctly..............instructions from the service manual............ "Position the tab of the trunk opener unit perfectly upright when the trunk opener rod is ins...

I'm currently out of state and won't return until Saturday............I will try moving the actuator out of the way or down and then try pulling on the rod............will report back after I try this method..........thanks again for the comments........still would be nice to have a picture of how t...

Thanks, I did try the method that you showed and was unable to unlock the latch.........even fabricated a rod out of 1/4" material to apply greater pressure..............manual clearly has two warnings that the trunk cannot be unlocked if the rod is not in the proper position...........I'm assu...