Page 1 of 1

Turn Relay. Part last one, I hope.

Posted: Sat Jul 04, 2020 7:48 pm
by Kryakozavr
Hi folks.

How-to modified original turn light relay:

1. disconnect relay under trunk.
1.a you will see 2 same relay, but different connectors. White - turn Relay. Black - hazard light.
2. Open relay and pull out PSB. Use small flat head screwdriver.
3. Clear PSB from white compound.
4. See attached picture, and cut same place.


You can adjust speed of blinking if you remove 50k resistor and put adjustable resistor - Multiturn Trimmer Potentiometer. (Resistor next to condesator)




Will check if auto canceling will work after modification and make additions.



   Never miss a video: Subscribe to the GoldwingDocs YouTube channel today!


Sorry for my English.
English not my first language.
P.S: WingAdmin, you can post this video on your YouTube channel if think this useful.

Re: Turn Relay. Part last one, I hope.

Posted: Mon Jul 06, 2020 10:17 pm
by Kryakozavr
Be careful with 50k resistor.
If you are not enough careful, you can kill your relay.
Don't ask me how I know.

Re: Turn Relay. Part last one, I hope.

Posted: Mon Apr 26, 2021 8:18 pm
by Kryakozavr
Self cancel turn lights still working, if you interested.

Re: Turn Relay. Part last one, I hope.

Posted: Mon Apr 26, 2021 9:03 pm
by MikeB
Great job. Thanks for your research and development.

Re: Turn Relay. Part last one, I hope.

Posted: Mon Apr 26, 2021 10:16 pm
by Rambozo
Very nice. Thanks for the info.