I have open face helmets with older style J&M audio headsets that clamp on the helmet and a one piece cord plugs in to the Goldwing. Din plug on the bike end and right angle 5 pin job on the helmets. Not sure of model numbers as mine are long ago worn off.
Where can I buy matching plugs to build your own custom cords. ? The "din" plugs on the bike end are no problem but finding that right angle 5 pin plug to plug into helmet.. not sure where to look.
Or can one buy aftermarket audio cables that are not 60.00 a pop?
thanks
wingryder
Custom Audio cables for J&M/GL1500
-
Wingryder1
- Posts: 71
- Joined: Sun Mar 15, 2015 10:32 am
- Location: Cedar Ciity, Utah
- Motorcycle: 1994 Honda Gl1500 SE three older goldwings, and a host of other cycles going clear back to High School with a 58 Cushman Eagle.
-
WingAdmin
- Site Admin
- Posts: 23303
- Joined: Fri Oct 03, 2008 4:16 pm
- Location: Strongsville, OH
- Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (sold)
1998 XV250 Virago (sold)
2012 Suzuki Burgman 400 (wife's!)
2007 Aspen Sentry Trailer - Contact:
Re: Custom Audio cables for J&M/GL1500
It's not available anywhere. That connector is proprietary to J&M, specifically so that you can only buy their cables to work with their headsets.Wingryder1 wrote:I have open face helmets with older style J&M audio headsets that clamp on the helmet and a one piece cord plugs in to the Goldwing. Din plug on the bike end and right angle 5 pin job on the helmets. Not sure of model numbers as mine are long ago worn off.
Where can I buy matching plugs to build your own custom cords. ? The "din" plugs on the bike end are no problem but finding that right angle 5 pin plug to plug into helmet.. not sure where to look.
Or can one buy aftermarket audio cables that are not 60.00 a pop?
thanks
wingryder