Just in time for Christmas

Technical information and Q&A applicable to all years and models of Goldwings
Post Reply
Old Fogey
Posts: 884
Joined: Fri Oct 30, 2009 2:09 am
Location: Glasgow Scotland
Motorcycle: 1976 GL1000
1979 GL1000

Just in time for Christmas

Post by Old Fogey »

Just in time for Christmas!
Sorry about the long wait for those of you that are holding your breath for news.

We have just received the second batch of GL1000 Big End Bearings (the first lot went to the guys who had pre-ordered).

Go here: http://www.wingovations.com/crankshaft- ... 4593202522

You will see that we are also committed to find replacements for the other hard to find bearings for the four cylinder range. This is proving harder than we anticipated; not so much to get them made but to get quotes that we could live with due to our relatively small quantities.
So again, don't hold your breath on these. Hopefully , we will get there eventually.
Next up will be the Main Bearings for GL1000 and GL1100

'Impossible' is just a level of difficulty! The only stupid question is the one you didn't ask first!

( Seriously, you haven't read all 115 pages of my http://www.wingovations.com website ?? :shock: )
Post Reply