Sena SM10 Dual Stream Transmitter

alland3851 · Post by **alland3851** » Thu Aug 05, 2021 11:13 am

Hi, apologies if this has been covered before.

Will a standard 5 pin Din connector to 3.5mm stereo jack work with SM10. Having problems here in the UK sourcing a Sena cable and have read some negative reports on the Sena one.
Thanks

Andy Cote · Post by **Andy Cote** » Thu Aug 05, 2021 2:10 pm

So, I'm not certain on which cable you are looking at. There are some, e.g. https://cyclemax.com/inc/sdetail/din_to ... 129/339291, where the description indicates that they allow you to connect a common 3.5mm plug used on listening headsets/earbuds. One of these adapter cables along with a short 3.5mm male to male connector cord should work as a minimum connected to the AUX jack on the SM10 even if it did not work on the primary AUDIO in jack.

alland3851 · Post by **alland3851** » Fri Aug 06, 2021 3:23 am

Thanks for the info Andy. That answers my question.

Allan

Andy Cote · Post by **Andy Cote** » Fri Aug 06, 2021 5:05 am

Another synapse fired (slowly). The AUX in may be mono, not stereo. I'd check the SENA manual first.

alland3851 · Post by **alland3851** » Fri Aug 06, 2021 9:38 am

Just checked the SM10 Manual. Aux is Stereo

Sena SM10 Dual Stream Transmitter

Sena SM10 Dual Stream Transmitter

Re: Sena SM10 Dual Stream Transmitter

Re: Sena SM10 Dual Stream Transmitter

Re: Sena SM10 Dual Stream Transmitter

Re: Sena SM10 Dual Stream Transmitter