Wiring Plugs to Replace The Old Ones that Are Bad

fastf · Post by **fastf** » Sat Jun 11, 2011 8:11 pm

I would like to know are there anyone ever replaced the wire plugs on the end of the stator plug and at the rectifier. I know you are asking why just go on and hard wire the thing well but If you want a original bike and people you are trying to sell it as original might fround. Honda ought to be ashamed for putting such lite stuff on these bikes but to little to late oh I forgot to mention this is on a 1200 LTD any help I would be greatful.

trike lady · Post by **trike lady** » Sat Jun 11, 2011 9:58 pm

You can do it but just make sure the original pins and sockets are clean and they fit tight.

littlebeaver · Post by **littlebeaver** » Sun Jun 12, 2011 2:17 am

Seems like WingAdmin. knows of a place that you can get the original connection plugs for the stator yellow wires...Hang in there he will more than likely post it, I know I have seen it here a long while ago..It's a site that has about every connection you would ever need if I remember right..there's certainly isn't anything wrong with fixing it proper as it once was..Check out the Search forum you might find it here somewhere..

fastf · Post by **fastf** » Sun Jun 12, 2011 5:55 am

Thanks Once Again Littlebeaver your the best.

fastf · Post by **fastf** » Sun Jun 12, 2011 5:56 am

Thanks Trikelady for the info.

dingdong · Post by **dingdong** » Mon Jun 13, 2011 8:07 am

vintage connectors: http://vintageconnections.com/

littlebeaver · Post by **littlebeaver** » Mon Jun 13, 2011 12:51 pm

dingdong wrote:vintage connectors: http://vintageconnections.com/

That's the site, thank you so much dingdong in Oklahoma..

fastf · Post by **fastf** » Mon Jun 13, 2011 3:16 pm

I wish they had a phone number or some way I can talk to them.Thanks everyone .

YouTube · Post by **WingAdmin** » Mon Jun 13, 2011 3:29 pm

dingdong wrote:vintage connectors: http://vintageconnections.com/

Thanks for stepping up with that, I was away this weekend (yes I took the bike!) so I am a bit behind on messages at the moment.

Yes, that's the site I use, they have every connector used in the Goldwing (as far as I've found) on their site.

littlebeaver · Post by **littlebeaver** » Mon Jun 13, 2011 4:22 pm

fastf wrote:I wish they had a phone number or some way I can talk to them.Thanks everyone .

Yes, I enjoy speaking to people when I order something too... I hate doing the e-mail thing because you never know when they will read it..I guess that's worth a try though, maybe you can ask if there is a phone number so you can speak with someone, ask them via e-mail..I don't know what else a guy could do when they don't post a phone number..

Wiring Plugs to Replace The Old Ones that Are Bad

Wiring Plugs to Replace The Old Ones that Are Bad

Re: Wiring Plugs to Replace The Old Ones that Are Bad

Re: Wiring Plugs to Replace The Old Ones that Are Bad

Re: Wiring Plugs to Replace The Old Ones that Are Bad

Re: Wiring Plugs to Replace The Old Ones that Are Bad

Re: Wiring Plugs to Replace The Old Ones that Are Bad

Re: Wiring Plugs to Replace The Old Ones that Are Bad

Re: Wiring Plugs to Replace The Old Ones that Are Bad

Re: Wiring Plugs to Replace The Old Ones that Are Bad

Re: Wiring Plugs to Replace The Old Ones that Are Bad