Honda Valkyrie bank angle sensor

Brothers and Sisters to our Goldwings - Other Bikes we Own
  • Sponsored Links
Post Reply
User avatar
Posts: 214
Joined: Mon Jul 23, 2012 4:52 pm
Location: United Kingdom
Motorcycle: 1979 gl1000 trike
1989 gl1500 trike

Honda Valkyrie bank angle sensor

Post by terryt » Sat Dec 03, 2016 3:04 pm

Hi can any one help with this. a friend has a Valkyrie and it wont start no spark at the plugs
I have bypassed the bank angle sensor still no spark it looks like there is a bank angle sensor relay inline 4 terminals 2 white wires red/white and a black/light green that goes to the kill switch.

Here's my question it looks like there is a red/black wire to a 10amp fuse a white wire to the angle sensor a red/white and a white 2 wires to the relay and a black and light green to the kill switch if I bypass all this by connecting a link wire from the fuse to the black and white coil wire to start and check if there is a broken wire or the relay is stuffed
there is power and the engine turns over head light goes out when starter button pressed but is temperamental
hope this make sense

Post Reply