xm radio
-
toanogreen
- Posts: 216
- Joined: Sun Mar 06, 2011 6:59 am
- Location: Toano, Va
- Motorcycle: 2007 GL1800 with NAV and ABS, level 3
Previously Owned:
1999 GL1500 Goldwing SE
1989 GL1500 Goldwing
xm radio
What's the best place run my XM radio antenna wire? I have that long 20' wire that I would like to conceal as much as possible. I have placed the receiver on top of the left brake/clutch bowl and it works well there. I ran the power and aux cable down the handle bar to the left box giving plenty of slack to turn. The magnetic part is on the left front speaker right now. I can move it easily if necessary. I could just stuff all the wire in the box, but that looks cheesy. Any thoughts or ideas?
-
epiphysis
- Posts: 2
- Joined: Thu Apr 19, 2018 7:17 pm
- Location: Ashtabula, Ohio
- Motorcycle: 2019 Goldwing Tour DCT, 2006 VTX 1300R, 2012 Spyder RT
Re: xm radio
I have the same antennae. I put mine on the brake reservoir. I ran it along the handle bar and with a 3 foot long wire tie, I ran it along the inside of the body to the back of the bike where I put it in the receiver for it on the radio under the back of the seat. In order to not have a big lump of wire, I cut it short and soldered it back together. I works great.