75 gl 1000 turn signal wiring

[jon jay]

hello,I've been working on my 75 turn signal lights,i finally got the rear to work and the left front,I can't seem to get the front right to work,before i started i only had the rear right blinking,and the front blinkers would light up but not blink so i have made some progress but would really like all 4 to work,any ideas would be appreciated

[wjnfirearms]

What did you do so far to get where you are and what did you find wrong?

[wjnfirearms]

You should be able to print this jpeg diagram also. Can't figure out why it attached sideways, though.

[jon jay]

first i found that the po had the rear wire coming off the left signal wired straight to the front left signal,so i rewired the rear wire to to harness under the seat and pluged the front wire back into the loop in the fairing.this gave me back my blinkers all but the front right,so I'm thinking I have a loose wire in the fairing

[1grouch2u]

first i found that the po had the rear wire coming off the left signal wired straight to the front left signal,so i rewired the rear wire to to harness under the seat and pluged the front wire back into the loop in the fairing.this gave me back my blinkers all but the front right,so I'm thinking I have a loose wire in the fairing

JJ- you ever get that straightened out? Is it a Vetter fairing? Do you have the wiring diagram for ... whatever's on there? Let us know.