Page 1 of 1

Heel and toe shifter GL 1000

Posted: Thu Dec 19, 2013 9:02 pm
by BaronBigDog
Is there a kit to install a heel and toe shifter on a 75 GL 1000 that does not require floor boards? I want to stay with the stock pegs, but my foot is so big that I have a hard time wedging it into the shifter.

In addition is there a retro kit for the rear brake pedal that extends it outward and forward. Big feet again.

I can cobble something together for both issues, but I want something that looks good and do not have the time to do the job properly.

Re: Heel and toe shifter GL 1000

Posted: Fri Dec 20, 2013 6:26 am
by Overdog
Not sure about the shifter but as for the brake pedal...I haven't done it yet but I've looked into it and on the 1100 you can adjust the linkage below the master cylinder and lower the pedal so you won't have to raise your foot to get on the pedal...that might help

Re: Heel and toe shifter GL 1000

Posted: Sat Dec 21, 2013 5:16 pm
by BaronBigDog
Thanks much, I will give it a shot.