Wiring Question


Information and questions on GL1000 Goldwings (1975-1979)
Post Reply
User avatar
chiltonj
Posts: 18
Joined: Wed Jul 02, 2014 3:39 pm
Location: Simpsonville, SC
Motorcycle: 1978 GL1000 A

Wiring Question

Post by chiltonj »



I have a quick question about a wire that has been cut on my bike. This is the wire that comes out of the temp sensor near the radiator fan and into the junction box with the rest of the harness. The following pictures outline my problem. The last actually shows the cut. IF anyone knows where this wire went (i have checked the wiring diagram, but my ability to understand it is not that good) i would definitely appreciate it.








User avatar
dingdong
Posts: 4025
Joined: Thu Apr 08, 2010 8:35 am
Location: Oklahoma City
Motorcycle: 1976 gl1000
1993 gl1500A
2004 NRX1800 Rune SOLD

Re: Wiring Question

Post by dingdong »

The temp sensor wire goes through the connector and then directly to the temperature gauge. No where else.
User avatar
chiltonj
Posts: 18
Joined: Wed Jul 02, 2014 3:39 pm
Location: Simpsonville, SC
Motorcycle: 1978 GL1000 A

Re: Wiring Question

Post by chiltonj »

i was looking up parts, and saw the sub harness in question. It has 2 connections, one to the "junction box" where most of the wiring harness routes to, and a smaller connector. Is this the connection to the temperature gauge you mention?
Post Reply