GL1000 78' STARTER HELP

eekclegzed · Post by **eekclegzed** » Tue Oct 20, 2015 3:09 pm

Hello fellow Goldwingers, after recently doing a full engine rebuild I've noticed the stud/ terminal on my starter has become loose and wobbles around a lot. This is causing a intermitant continuity problem when the solenoid is engergised. If I wobble the stud and try to start it works. Anyone else had this problem?

Thanks

Post by **WingAdmin** » Wed Oct 21, 2015 9:45 am

If this is tightened too tight it can break, or can break where it is welded on the inside of the starter. See: viewtopic.php?t=9718#p45381

GL1000 78' STARTER HELP

GL1000 78' STARTER HELP

Re: GL1000 78' STARTER HELP