Correct route of Breather/Drainage tubes on GL1000

[GL1000-1976-SCX-593P]

Hi All,
was hoping to persuade someone into drawing a diagram as to the correct route for the bretaher pipes on a 1976 GL1000 I have at least one missing on my bike in the picture and I want to also get it right on my GL1000 Executive project.
There does not seem to be a complete description in the extensive parts and how to manuals I have??
Regards to all
John

[RBGERSON]

PAGE 9-5 of the OEm shop manual HAS A PIC OF THE breather system. A tube goes from the air box to the crank case breather..then one tube goes to the stub/port on the engine to suck engine gas back into the air box the other tube is just a drain to the ground on the 110o's they added a puke bucket to hold the liquids. On the 1000's I think it just drains to the ground.

[GL1000-1976-SCX-593P]

Thank You RB, it absolutely does, Id forgotten I have the 300 plus page manual on my pc, found it in a Jiffy once I recalled having it... that will help me tremendously.