missing o ring

otakuphill · Post by **otakuphill** » Sun Sep 10, 2017 7:02 pm

I'm rebuilding the carbs on my 76 gl1000 and on 2 of the carbs there are 2 o-rings under the carb pistons and 2 are i presume missing. all of the carb kits i found don't include this o-ring. where can i find them?

Maz · Post by **Maz** » Mon Sep 11, 2017 12:34 pm

The part number is 16010-371-004 which show up as part of a gasket set from Partzilla. $46 though! Might be easier to find some used ones.
Maz

Just found the same from David Silver for £10 here in the UK.
Maz

otakuphill · Post by **otakuphill** » Mon Sep 11, 2017 4:27 pm

Maz wrote: ↑Mon Sep 11, 2017 12:34 pm The part number is 16010-371-004 which show up as part of a gasket set from Partzilla. $46 though! Might be easier to find some used ones.
Maz

Just found the same from David Silver for £10 here in the UK.
Maz

Does each carb have them? Igot my goldwing to run so wander if i need them.

Maz · Post by **Maz** » Tue Sep 12, 2017 2:06 am

Yes they should be in each carb. They are called a damper ring and the slide piston sits on it at rest. It will run without them but the idle mixtures will be upset.

Maz

missing o ring

missing o ring

Re: missing o ring

Re: missing o ring

Re: missing o ring