Front Forks
-
- Sponsored Links
-
danielklinger
- Posts: 22
- Joined: Sun May 17, 2015 4:04 pm
- Location: United States
- Motorcycle: 1977 GL1000 Goldwing
Front Forks
I just replaced the seals in my front forks. I was wondering...I noticed the springs are different on each end. I assume the bigger end goes down and the narrower end goes up. Is this correct? I didn't notice how they were when I took them out of the fork. Thanks for your feedback if you have any thoughts. Thanks, Dan
-
kndw
- Posts: 90
- Joined: Sat Jun 19, 2010 2:56 am
- Location: Driebergen, Utrecht
- Motorcycle: 1976 GL1000 Plempbak
Re: Front Forks
Those are progressive springs; an upgrade. You are right about the orientation. Narrow part goes up.