Breather hose/Clutch cable Rad overflow layout
-
- Posts: 2
- Joined: Tue May 29, 2018 3:46 pm
- Location: lincoln
- Motorcycle: 1978 gl1000
1968 T100ss
Breather hose/Clutch cable Rad overflow layout
1978 gl1000 Does anyone have a picture/diagram of the correct/manufacturers layout for clutch cable, rear brake light cable, radiator overflow pipe and breather hose as they pass between fuel tank and frame on their way up towards the airbox. I am currently correcting many faults from previous owners. I can`t seem to find a pic anywhere. cheers Pete
- rudolphwolven
- Posts: 121
- Joined: Fri Jun 20, 2014 7:05 am
- Location: Netherlands - Utrecht
- Motorcycle: 1975 GL1000 K1
Re: Breather hose/Clutch cable Rad overflow layout
I hope this will help a little......
The 2nd link (German language) can be enlarged !!
Best regards from the Netherlands / Europe,
Ruud
https://postimg.cc/mtmPLp5x
https://postimg.cc/t7CyqRQT
Pictures during dismantling a 1975 GL1000 K1 before restoration...........
The 2nd link (German language) can be enlarged !!
Best regards from the Netherlands / Europe,
Ruud
https://postimg.cc/mtmPLp5x
https://postimg.cc/t7CyqRQT
Pictures during dismantling a 1975 GL1000 K1 before restoration...........
Proud winner of the NGWClub-USA contest Bike of the Year 2016--
-
- Posts: 2
- Joined: Tue May 29, 2018 3:46 pm
- Location: lincoln
- Motorcycle: 1978 gl1000
1968 T100ss
Re: Breather hose/Clutch cable Rad overflow layout
Thanks Ruud. I have seen all those diagrams before. It is the right side of the bike where my problem is, where the clutch cable comes up from the engine and meets the radiator overflow pipe, the breather hose and brake light cable. there is a limited amount of space between the fuel tank and frame. Surely Honda had the best order to fit these 4 items.
- rudolphwolven
- Posts: 121
- Joined: Fri Jun 20, 2014 7:05 am
- Location: Netherlands - Utrecht
- Motorcycle: 1975 GL1000 K1
Re: Breather hose/Clutch cable Rad overflow layout
Proud winner of the NGWClub-USA contest Bike of the Year 2016--
- flyday58
- Posts: 70
- Joined: Tue Jan 08, 2019 1:10 am
- Location: Cloudcroft NM
- Motorcycle: 1976 GL1000
1976 GL1000 LTD
1981 CB750C
1997 BMW R1100RT
1974 Yamaha GT80
Re: Breather hose/Clutch cable Rad overflow layout
Bump. Anyone have a good pic or description concerning this? I think Honda invented the blivit, because this is definitely one. Cramming two hoses and a clutch cable between the frame and the tank so far ain't happening for me. It would be easier (but uglier) to route one of the hoses outside the frame. Thanks.
"Who left the fridge open?" Tug Speedman