What attaches here? Anything?


Information and questions on GL1000 Goldwings (1975-1979)
Post Reply
BevoBowen
Posts: 6
Joined: Thu Nov 15, 2018 3:43 pm
Location: Plano, Texas
Motorcycle: 1976 GL1000

What attaches here? Anything?

Post by BevoBowen »



My ‘76 has a threaded hole on backside of right cylinder head. Is anything supposed to attach there? The left cylinder has a threaded hole on backside of head, same relative place, and on my bike there’s a pan head screw holding a clip that secures wires from the points.

So, is the hole on right side used?

Thanks!


Earl43P
Posts: 141
Joined: Sat Nov 01, 2014 7:15 pm
Location: Farmington, PA
Motorcycle: 21 KTM390A
99 Valkyrie IS
04 Polaris Magnum 330

Re: What attaches here? Anything?

Post by Earl43P »

Both heads are identical, interchangeable, same part (except for the cams), so that hole must not be used on that side.
When all else fails, RTFM!

21 KTM390A “Hootenanny”
99 Valkyrie Interstate, “Favorite”
82 GL1100 Sold 3/17 (miss that ticket getter)
93 GL1500I Sold 3/20 (Meh, but put 56k miles on it)
04 ST1300 Sold 4/22 (Fast, fun, never “loved” it)
Post Reply