Hello all. I just bought a 75gl1000 last summer. Cafe racer style. I am wondering what colour the wires are for the front brake pressure switch attached to the brake lever
Tia
75 gl1000 front brake pressure switch
-
newday777
- Posts: 2145
- Joined: Tue Jan 11, 2011 5:21 pm
- Location: Milford NH summer/fall & Oceanside, CA winters(N San Diego) with lots of miles riden between
- Motorcycle: 2008 Cabernet Red. Level 4
1983 GL1100A Wineberry 36,000 miles
1975 CB750 K5 Planet Blue 7,800 miles
1976 CB750 K6 Anterris Red 25,000 miles
Past rides
1999A Restored from PO neglect & sold at 19,000 miles
1999SE Totaled by cager at 105,000 miles
Re: 75 gl1000 front brake pressure switch
Welcome to the forum James624
First off, the front brake pressure switch, #2, is not on the master cylinder lever, it's on the D block on the triple tree. Has someone changed the master cylinder out?
Green/white and green/yellow according to the schematic diagram
First off, the front brake pressure switch, #2, is not on the master cylinder lever, it's on the D block on the triple tree. Has someone changed the master cylinder out?
Green/white and green/yellow according to the schematic diagram
- Attachments