
Lower Engine Mount Bolt for Accessories
-
- Posts: 21
- Joined: Sun Feb 23, 2020 8:17 pm
- Location: Palmdale, CA
- Motorcycle: 1978 GL1000 Goldwing
Lower Engine Mount Bolt for Accessories
Picked up a set of used engine guards for my '78 GL1000. Great deal. Now when installing them, I distinctly remember something I read way back regarding a longer engine mount being required.
So now I'm trying to figure out where I can source just such a bolt. Mine is about 280mm long, but too short. I could use all-thread, but only as a last resort. I'd prefer a real bolt. Any suggestions? Seems all of the good salvage yards closed in So. Cal, so I've had to source parts elsewhere, but it's always good to know what you are asking for.

-
- Posts: 306
- Joined: Wed Mar 12, 2014 1:56 pm
- Location: Vista, ca
- Motorcycle: 1985 Goldwing Aspencade (GL1200A)
2002 GL1800
Former bikes;
2000 R1100RT
2005 Suzuki Bandit
1979 Yamaha XS1100
1978 Yamaha XS1100 Special
1990 Yamaha XV250
1980 Yamaha XV750
1979 Honda CB750
1968 Triumph Bonneville T120
1973 Honda CB450
1968 Harley Davidson Sportster
1974 Honda CB750
1968 Honda CL72
Re: Lower Engine Mount Bolt for Accessories
How about brand new 10.9 black 10mm X 300 11.69 coarse (x 1.5)
https://www.belmetric.com/10x15-coarse- ... 14350.html
or
https://www.belmetric.com/109-coarse-th ... -3020.html
1 meter metric threaded rod 10.9 10 mm
or https://www.boltdepot.com/Threaded_rod_ ... 1.5mm.aspx
https://www.belmetric.com/10x15-coarse- ... 14350.html
or
https://www.belmetric.com/109-coarse-th ... -3020.html
1 meter metric threaded rod 10.9 10 mm
or https://www.boltdepot.com/Threaded_rod_ ... 1.5mm.aspx
-
- Posts: 132
- Joined: Sat Jun 19, 2010 2:56 am
- Location: Driebergen, Utrecht
- Motorcycle: 1976 GL1000 Gran' Luxe
Re: Lower Engine Mount Bolt for Accessories
I also used all-thread... no other option as far as I know