output shaft cover bearing

Information and questions on GL1000 Goldwings (1975-1979)
Post Reply
Posts: 1
Joined: Wed Jul 29, 2020 2:41 pm
Location: cork,ireland
Motorcycle: 1977 gl1000

output shaft cover bearing

Post by trikemadd »

hi guys, i have to replace the rear engine cover due to damage from a previous owner trying to drill out sheared bolts. my question is with regard to the output shaft. it came out with the rear cover and i want to replace the bearing. whats the best way to get the shaft out of the cover? thanks guys

Posts: 95
Joined: Wed Aug 17, 2011 5:22 pm
Location: Bellevue, NE
Motorcycle: 1977 GL1000
1975 CB750
2011 NT700VA

Re: output shaft cover bearing

Post by Shadowjack »

It's just snug. It'll tap out.
Post Reply