hello guys,
have had a look but haven't been able to find anything on the topic.
i am just started restoring an old 1977 rustbucket i picked up on ebay and need a centre stand to make dismantling the back end easier.
I have not been able to find any compatibility info regarding years 75-79, the part numbers differ but can anyone tell me which parts are interchangeable amongst models? i have read that 75-77 generally share parts but not sure.
thanks for any ifo
mike
Gl1000 centre stand compatibility
-
- Posts: 6
- Joined: Tue Mar 17, 2020 3:31 am
- Location: London
- Motorcycle: Interstate gl1200 94
-
- Posts: 24
- Joined: Tue Oct 13, 2020 3:47 pm
- Location: San Antonio TX
- Motorcycle: 1978 GL1000
Re: Gl1000 centre stand compatibility
My guess is that you can get a center stand for any of the GL1000's and it will fit. I also have a GL1K, a 1978 model that some lunatic of a previous owner removed the center stand from. WTF?? And worse - he bent the little arms badly on purpose to remove it. So I also have to buy a replacement and then see if I can re-bend the four little arms to retain the center stand, and there are no images or forum discussions on this. Ebay does have a boat load of center stands for you, and they are cheap. Go buy one and tell me how to install it 

-
- Posts: 6
- Joined: Tue Mar 17, 2020 3:31 am
- Location: London
- Motorcycle: Interstate gl1200 94
Re: Gl1000 centre stand compatibility
Thanks, appreciate the relly. I did get one on the end, from 75, gonna try it and see If it fits.
-
- Posts: 24
- Joined: Tue Oct 13, 2020 3:47 pm
- Location: San Antonio TX
- Motorcycle: 1978 GL1000
Re: Gl1000 centre stand compatibility
Cool. If you can post some photos that would be good for this thread. Not much on center stands here, and its a vital piece of hardware. If you need it, there is some good info on valve adjustments, timing, etc here. Getting your fuel tank clean will eventually become a priority for you, too.