Page 1 of 1

Clutch rebuild question

Posted: Thu Jun 26, 2014 9:21 pm
by robertdawber
The manual says 7ft pounds when replacing the lifter plate-this great article on how to remove and replace the the clutch (while on the bike) says 87-121 pounds-which is correct? Any help would be great!
Website with the 121 reference:
http://www.ngwclub.com/forum/viewtopic.php?t=6905

Re: Clutch rebuild question

Posted: Fri Jun 27, 2014 11:09 am
by WingAdmin
robertdawber wrote:The manual says 7ft pounds when replacing the lifter plate-this great article on how to remove and replace the the clutch (while on the bike) says 87-121 pounds-which is correct? Any help would be great!
Website with the 121 reference:
http://www.ngwclub.com/forum/viewtopic.php?t=6905
That web site says 87-121 INCH pounds, not foot pounds. 87 in-lb is 7.25 ft-lb. 121 in-lb is 10 ft-lb.

Re: Clutch rebuild question

Posted: Fri Jun 27, 2014 6:01 pm
by robertdawber
:) Why I always use a proof reader:)!