Handlebar switch


Information and questions on GL1100 Goldwings (1980-1983)
Post Reply
User avatar
squirrel
Posts: 416
Joined: Thu Jan 31, 2013 10:19 am
Location: portsmouth uk
Motorcycle: 1982 gl1100c (interstate)

Handlebar switch

Post by squirrel »



My right side handlebar switch has a crack on the lower half ...I've been looking for a replacement one and the only ones available do not have the switch to turn the lights on/off
Its a 1982 gl1 100 in the UK. Any ideas on where to find one greatly appreciated ...thanks tom


User avatar
WingAdmin
Site Admin
Posts: 22241
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (sold)
1998 XV250 Virago (sold)
2012 Suzuki Burgman 400 (wife's!)
2007 Aspen Sentry Trailer

Re: Handlebar switch

Post by WingAdmin »

squirrel wrote: Thu Oct 26, 2017 10:06 am My right side handlebar switch has a crack on the lower half ...I've been looking for a replacement one and the only ones available do not have the switch to turn the lights on/off
Its a 1982 gl1 100 in the UK. Any ideas on where to find one greatly appreciated ...thanks tom
That's going to be tough to find - the vast majority of 1100's made did not have that switch, so the number of them on the used parts market is going to be small.

What about repairing the crack?
User avatar
squirrel
Posts: 416
Joined: Thu Jan 31, 2013 10:19 am
Location: portsmouth uk
Motorcycle: 1982 gl1100c (interstate)

Re: Handlebar switch

Post by squirrel »

I don't want to take it apart if I don't have to. .I have a new one without the light switch just wondering if I could make one out of both. Thanks
User avatar
jeffcosmo
Posts: 228
Joined: Thu Aug 22, 2013 9:26 pm
Location: Burlington, WI (Honey Lake)
Motorcycle: 1983 GL1100 Aspencade
1983 GL1100 Aspencade
1983 GL1100 Aspencade (parts bike)

Re: Handlebar switch

Post by jeffcosmo »

I believe it is possible, though it would take a bit of machining. You'll need to machine the slot, and drill/tap any holes necessary for mounting the switch. AFAIK, the housing is the same except for the extra machining.

Cosmo
User avatar
squirrel
Posts: 416
Joined: Thu Jan 31, 2013 10:19 am
Location: portsmouth uk
Motorcycle: 1982 gl1100c (interstate)

Re: Handlebar switch

Post by squirrel »

Thanks for the reply .would the headlight switch just slot in because the wiring in the one without the switch would keep the lights on .i think as this is not my area of knowledge cheers tom
User avatar
jeffcosmo
Posts: 228
Joined: Thu Aug 22, 2013 9:26 pm
Location: Burlington, WI (Honey Lake)
Motorcycle: 1983 GL1100 Aspencade
1983 GL1100 Aspencade
1983 GL1100 Aspencade (parts bike)

Re: Handlebar switch

Post by jeffcosmo »

No. If you just plugged the non-switch wiring into the bike, the lights would not work at all. The wiring on the US bikes is slightly different: ie, the light wiring is looped, where the wiring for the UK goes through the switch (obviously, as it is a light switch).

Cosmo


Post Reply