best way to reinstall Front Brakes Piston


Information and questions on GL1100 Goldwings (1980-1983)
Post Reply
User avatar
RuDogGL
Posts: 100
Joined: Mon Oct 30, 2017 9:05 am
Location: Dixon, CA
Motorcycle: 1982 GL1100 Interstate GoldWing
Contact:

best way to reinstall Front Brakes Piston

Post by RuDogGL »



I would like to hear from you all about the best way to push the Piston back into the Calipers on 82 model, thanks,


Live Life The Way It Was Meant To Be,
Sin Free
and then
Ride On
The Wings of a GoldWing
GL1100i
User avatar
jeffcosmo
Posts: 228
Joined: Thu Aug 22, 2013 9:26 pm
Location: Burlington, WI (Honey Lake)
Motorcycle: 1983 GL1100 Aspencade
1983 GL1100 Aspencade
1983 GL1100 Aspencade (parts bike)

Re: best way to reinstall Front Brakes Piston

Post by jeffcosmo »

dip in brake fluid, then push home.
User avatar
virgilmobile
Posts: 9101
Joined: Sun Sep 19, 2010 5:39 pm
Location: Denham Springs,La.
Motorcycle: 1988 GL1500 I
Previously owned
78 GL1000
81 GL1100
82 GL1100 I
83 GL1100 I
83 GL1100 standard
84 GL 1200 I

Re: best way to reinstall Front Brakes Piston

Post by virgilmobile »

Leave the "O" ring out.Gently slide the piston in.If it sticks,remove and polish the area that's causing it to stick.The piston should slide smooth to the bottom and back out.Clean the seal groove.Coat the seal and piston with brake fluid.The piston should push in firm with 2 thumb pressure to the bottom.
User avatar
WingAdmin
Site Admin
Posts: 22224
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (sold)
1998 XV250 Virago (sold)
2012 Suzuki Burgman 400 (wife's!)
2007 Aspen Sentry Trailer

Re: best way to reinstall Front Brakes Piston

Post by WingAdmin »

If you can't push it in with your fingers, then there's something wrong - either it needs to be cleaned, or the caliper itself has some corrosion that needs dealing with. As was mentioned, coat with brake fluid, push it in, if it goes in all the way to the bottom, you're done. If not, pull it out and determine where it's binding, fix that, and repeat.

Make sure there is no gunge left on the piston - you might use some fine emery cloth to polish it and remove any foreign material if there is some.
User avatar
RuDogGL
Posts: 100
Joined: Mon Oct 30, 2017 9:05 am
Location: Dixon, CA
Motorcycle: 1982 GL1100 Interstate GoldWing
Contact:

Re: best way to reinstall Front Brakes Piston

Post by RuDogGL »

I was able to push all the Pistons into each chamber with out any resisted, after cleaning them with fine sandpaper, thanks you all for sharing your knowledge. :D


Live Life The Way It Was Meant To Be,
Sin Free
and then
Ride On
The Wings of a GoldWing
GL1100i
Post Reply