2 bad motors.
-
- Posts: 3
- Joined: Sun May 06, 2018 10:02 pm
- Location: Rainier, Oregon
- Motorcycle: 1983 Honda GL 1100 Aspencade
2 bad motors.
I have 2 GL1100 motors. One is an 81 1100 interstate and the other is an83 1100 aspencade. They both have problems. My main question is can the transmission from the 83 1100 Aspencade be put into the 81 1100 interstate engine block? Just curious.
-
- Posts: 1202
- Joined: Fri Jan 02, 2015 7:28 pm
- Location: Amity. Ar
- Motorcycle: 2010 GL1800
2004 Suzuki DR200
Re: 2 bad motors.
Yes it can. I did just that to one myself. You also have to change the final output gear, the one that the output shaft goes into.
-
- Posts: 3
- Joined: Sun May 06, 2018 10:02 pm
- Location: Rainier, Oregon
- Motorcycle: 1983 Honda GL 1100 Aspencade
Re: 2 bad motors.
Thank you very much. I guess now it's just a matter of taking the motor off, taking it apart and finding out if there is any internal damage from the right rear piston hitting what I'm guessing was the crank shaft after the piston rod got bent or compressed. Thanks again. Sandy.