Clutch plates


Information and questions on GL1100 Goldwings (1980-1983)
Post Reply
User avatar
terryt
Posts: 297
Joined: Mon Jul 23, 2012 4:52 pm
Location: United Kingdom
Motorcycle: 1979 gl1000 trike
1989 gl1500 trike
1995 Kawasaki gt550 Trike

Clutch plates

Post by terryt »



Hi Looking for some information on the clutch plates for a 1100.
Has any one got a spare one in there garage they could measure for me
looking for the internal and external diameter not including the tabs if possible.

Thanks


DaveO430
Posts: 1202
Joined: Fri Jan 02, 2015 7:28 pm
Location: Amity. Ar
Motorcycle: 2010 GL1800
2004 Suzuki DR200

Re: Clutch plates

Post by DaveO430 »

How about 127mm (5.010") ID, 147mm (5.790") OD
User avatar
terryt
Posts: 297
Joined: Mon Jul 23, 2012 4:52 pm
Location: United Kingdom
Motorcycle: 1979 gl1000 trike
1989 gl1500 trike
1995 Kawasaki gt550 Trike

Re: Clutch plates

Post by terryt »

DaveO430 wrote: Fri Jul 13, 2018 6:52 pm How about 127mm (5.010") ID, 147mm (5.790") OD
Thanks.
I see there a lot narrower on the friction area than the gl1000 ones.
DaveO430
Posts: 1202
Joined: Fri Jan 02, 2015 7:28 pm
Location: Amity. Ar
Motorcycle: 2010 GL1800
2004 Suzuki DR200

Re: Clutch plates

Post by DaveO430 »

Sorry, I had taken the 1st disc out of a clutch pack I had on the shelf and measured it. I went back and took out the second friction disc, it measures 120mm inside. I hadn't noticed that first one being different.
User avatar
terryt
Posts: 297
Joined: Mon Jul 23, 2012 4:52 pm
Location: United Kingdom
Motorcycle: 1979 gl1000 trike
1989 gl1500 trike
1995 Kawasaki gt550 Trike

Re: Clutch plates

Post by terryt »

DaveO430 wrote: Sat Jul 14, 2018 9:16 am Sorry, I had taken the 1st disc out of a clutch pack I had on the shelf and measured it. I went back and took out the second friction disc, it measures 120mm inside. I hadn't noticed that first one being different.
Thats ok. thanks for rechecking.


Post Reply