83 GL1100 carb o rings/washers


Information and questions on GL1100 Goldwings (1980-1983)
Post Reply
83wingwv
Posts: 9
Joined: Tue Oct 23, 2018 9:07 pm
Location: Morgantown, WV
Motorcycle: 83 Gl1100 Interstate, 18 R6

83 GL1100 carb o rings/washers

Post by 83wingwv »



Hey guys, well I guess I had a rookie moment when I took my carbs apart on my wing, I didn’t label them thinking I was getting a rebuild kit for each which I did, but now I have no clue and can’t find any info about which rubber o ring or metal washer goes in which slot or jet hole in each carb. I have a ton of extra rubber o rings for each carb and I’m lost as to where they go. If anyone can help me out I would greatly appreciate it, thanks.


User avatar
quasi2008
Posts: 149
Joined: Fri Oct 05, 2018 12:18 pm
Location: morgantown wv
Motorcycle: 1982 GL1100I INTERSTATE

Re: 83 GL1100 carb o rings/washers

Post by quasi2008 »

i just completed a rebuild on my 82's carbs. how far did you tear them down? I live just outside of Westover, if you want I can come over and try to help you out.
man can't live on air alone!
83wingwv
Posts: 9
Joined: Tue Oct 23, 2018 9:07 pm
Location: Morgantown, WV
Motorcycle: 83 Gl1100 Interstate, 18 R6

Re: 83 GL1100 carb o rings/washers

Post by 83wingwv »

I’ve got them apart and cleaned, now just beginning the rebuild process slowly. That would be great if you live close by, I have everything I need for the rebuild just wanted to make sure I didn’t miss anything.
User avatar
quasi2008
Posts: 149
Joined: Fri Oct 05, 2018 12:18 pm
Location: morgantown wv
Motorcycle: 1982 GL1100I INTERSTATE

Re: 83 GL1100 carb o rings/washers

Post by quasi2008 »

shoot me a p.m. with your address and I should be able to stop over tomorrow sometime, or whenever you're working on them.


man can't live on air alone!
Post Reply