Starter replacement


Information and questions on GL1100 Goldwings (1980-1983)
Post Reply
User avatar
truckerpee01
Posts: 8
Joined: Sat Oct 08, 2016 7:32 pm
Location: Fort Wayne Indiana
Motorcycle: 1983 GL1100 Interstate

Starter replacement

Post by truckerpee01 »



What's the easiest way to get to a replace my starte ;) r :roll: :?:


User avatar
Wilcoy02
Posts: 1210
Joined: Sun Nov 21, 2010 11:37 pm
Location: Marengo, Ohio
Motorcycle: 1983 GL1100 I purchased 3/16

1983 GL1100I frame with an 80 engine. poor boy installed with C-5 ignition--DIED in Grande Prairie Alberta Canada 8/15


98 valkyrie sold 8/16

Re: Starter replacement

Post by Wilcoy02 »

What bike are we talking about?

Take the battery cables off the battery. Take the hot wire off the starter. Be careful not to twist the post. Take the 2 bolts out and remove the starter.
User avatar
redbug
Posts: 543
Joined: Fri Sep 30, 2011 8:22 am
Location: Broken Arrow,Ok
Motorcycle: 1983 Gl1100I
1986 Harley FLHT

Re: Starter replacement

Post by redbug »

There is also a post on remove rebuild and replace starter in 1100 the how- to- articles.
" Riding on Tulsa Time "
User avatar
chief771
Posts: 101
Joined: Fri Feb 08, 2013 2:55 am
Location: Austin, mn
Motorcycle: 1980 Goldwing GL1100
1979 suzuki GL 750

Re: Starter replacement

Post by chief771 »

You need to be careful and make sure 5th he bike is on its side stand when you take the starter out. Otherwise the chain on the starter gear will fall back into the case. If that happens you probably would have to pull the engine to finish the job. Mostly just take your time and find the article on this site and read it. Awesome information. Good luck!


Where ever you go, That's where you are.
Chief771
Kevin
Post Reply