Hi can anybody tell me what size grips i need
For A 1983 Honda goldwing 1100
1983 Honda GoldWing Handlebars
-
newday777
- Posts: 2353
- Joined: Tue Jan 11, 2011 5:21 pm
- Location: Milford NH summer/fall & Oceanside, CA winters(N San Diego) with lots of miles riden between
- Motorcycle: 2008 Cabernet Red. Level 4
1983 GL1100A Wineberry 36,000 miles
1975 CB750 K5 Planet Blue 7,800 miles
1976 CB750 K6 Anterris Red 25,000 miles
Past rides
1999A Restored from PO neglect & sold at 19,000 miles
1999SE Totaled by cager at 105,000 miles
Re: 1983 Honda GoldWing Handlebars
You need a set for 7/8" handlebars.
The left is 7/8".
The right, throttle tube, is 1"
The left is 7/8".
The right, throttle tube, is 1"
-
newday777
- Posts: 2353
- Joined: Tue Jan 11, 2011 5:21 pm
- Location: Milford NH summer/fall & Oceanside, CA winters(N San Diego) with lots of miles riden between
- Motorcycle: 2008 Cabernet Red. Level 4
1983 GL1100A Wineberry 36,000 miles
1975 CB750 K5 Planet Blue 7,800 miles
1976 CB750 K6 Anterris Red 25,000 miles
Past rides
1999A Restored from PO neglect & sold at 19,000 miles
1999SE Totaled by cager at 105,000 miles
Re: 1983 Honda GoldWing Handlebars
BTW
All goldwings use 7/8" grip size.
You can even put heated grips on if you change your light bulbs out to LED bulbs so the stator can handle the heated grip draw, or you can put on a external car alternator.
These are some grips at cyclemax.com
https://www.cyclemax.com/gl1500_grips___pegs
All goldwings use 7/8" grip size.
You can even put heated grips on if you change your light bulbs out to LED bulbs so the stator can handle the heated grip draw, or you can put on a external car alternator.
These are some grips at cyclemax.com
https://www.cyclemax.com/gl1500_grips___pegs