source for 2.8 x 1.2 pilot screw o-rings ?


Information and questions on GL1100 Goldwings (1980-1983)
  • Sponsored Links
Post Reply
winguyjo
Posts: 165
Joined: Sat Aug 11, 2018 9:26 pm
Location: b.c. Canada
Motorcycle: wing1 : 1982 gl1100 interstate; resurrection complete.
wing2 : 1980 gl1100 interstate; resurrection complete. SOLD.
wing3 : 81 gl1100i frame / 82 gl1100a engine/ 81cb900 odds & ends; resurrection complete. it's naked.

source for 2.8 x 1.2 pilot screw o-rings ?

Post by winguyjo » Sat Apr 13, 2019 8:25 pm



a while back i found a link to a source for these ... a packet of 25 or something like that.
for some reason i thought i would easily find it when i was ready to order so i didn't bother to bookmark it ...DUH !!!!!
have been searching ebay and the closest i can find is either 3.0 x 1.2 or 2.8 x 1.6.
can anyone help me source these ?

thanks
joe



Good Hondog
Posts: 131
Joined: Sun May 14, 2017 6:56 pm
Location: Calgary, Alberta, Canada
Motorcycle: 1980 GL1100 Interstate

Re: source for 2.8 x 1.2 pilot screw o-rings ?

Post by Good Hondog » Sat Apr 13, 2019 11:07 pm

Hi Joe. Go to partsnmore.com and you'll see them in the carb section for the GL1100

winguyjo
Posts: 165
Joined: Sat Aug 11, 2018 9:26 pm
Location: b.c. Canada
Motorcycle: wing1 : 1982 gl1100 interstate; resurrection complete.
wing2 : 1980 gl1100 interstate; resurrection complete. SOLD.
wing3 : 81 gl1100i frame / 82 gl1100a engine/ 81cb900 odds & ends; resurrection complete. it's naked.

Re: source for 2.8 x 1.2 pilot screw o-rings ?

Post by winguyjo » Sun Apr 14, 2019 11:40 am

thanks, hondog !
while that wasn't the exact link i was looking for it does give me a part number to work with.
also, i really liked the partsnmore site ... lots of good pics as well as a good selection of bits and pieces for these old bikes.
thanks again,
joe

Post Reply