Help!


Information and questions on GL1100 Goldwings (1980-1983)
Post Reply
User avatar
Phantom6914
Posts: 25
Joined: Thu Jan 10, 2019 4:14 pm
Location: Ogden/Iowa
Motorcycle: 1981 GL1100

Help!

Post by Phantom6914 »



Where can I get a replacement left side front caliper? I busted my bleeder off inside and also snapped the extractor off inside as well. So no choice but to drill out and retap. However I had a friend assist and he drilled all the way through so now there is nothing for the bleeder to seal against. Any ideas or advice. Shy of plugging it with a bolt I dont know what to do.


DaveO430
Posts: 1202
Joined: Fri Jan 02, 2015 7:28 pm
Location: Amity. Ar
Motorcycle: 2010 GL1800
2004 Suzuki DR200

Re: Help!

Post by DaveO430 »

I have one, not even stuck. You would have to put new seals in it. $25 and it's yours.
User avatar
Phantom6914
Posts: 25
Joined: Thu Jan 10, 2019 4:14 pm
Location: Ogden/Iowa
Motorcycle: 1981 GL1100

Re: Help!

Post by Phantom6914 »

Where are you located?
DaveO430
Posts: 1202
Joined: Fri Jan 02, 2015 7:28 pm
Location: Amity. Ar
Motorcycle: 2010 GL1800
2004 Suzuki DR200

Re: Help!

Post by DaveO430 »

A long way from you, see my profile? If you want it I will have to mail it or you will have to make a long trip, PM me.
User avatar
Phantom6914
Posts: 25
Joined: Thu Jan 10, 2019 4:14 pm
Location: Ogden/Iowa
Motorcycle: 1981 GL1100

Re: Help!

Post by Phantom6914 »

Was able to use a dorman bleeder repair kit. Part #13915. Highly recommended. Works like a charm.


Post Reply