trying to identify Subwire harness for air suspension Compressor and Gauge


Information and questions on GL1100 Goldwings (1980-1983)
Post Reply
User avatar
Rc67
Posts: 80
Joined: Sun May 20, 2018 6:26 pm
Location: Jackson, ms
Motorcycle: 1980 GL1100I

trying to identify Subwire harness for air suspension Compressor and Gauge

Post by Rc67 »



Guys,

I decided to repair my Progressive shocks, and in the process, decided to purchase an 82 Compressor and Gauge system off of eBay. The system looks good, but the wiring that came with it was a butcher job. the original OEM sub-wire is unavailable so I get it. I'm a little confused by the wiring, I thought I had it configured correctly, but when I went to connect it, it came on automatically without pushing any buttons to either the front or back shock hoses.

the pic below shows the wiring for the gauge cluster. Need to know which are Positive and negative leads. I thought the Green/BLK wires were negative and the Brown and Dark Green were Positive, but I'm not sure now.

Brown Arrow - Brown wire
dark Green arrow- solid green wire
Light Blue arrow- grn/blk wires


pic number 2: is the main wire connecting to the compressor directly. (Green/BLK and Solid Green wire) I thought the Green/BLK was negative here as well?




User avatar
Rc67
Posts: 80
Joined: Sun May 20, 2018 6:26 pm
Location: Jackson, ms
Motorcycle: 1980 GL1100I

Re: trying to identify Subwire harness for air suspension Compressor and Gauge

Post by Rc67 »

I was able to figure out the wiring scheme, but now I need to see if I can find this somewhere...does anyone know where I might look for this part?


Post Reply