Not fireing on 3 and 4 selender


Information and questions on GL1100 Goldwings (1980-1983)
Post Reply
User avatar
wingman83
Posts: 83
Joined: Sun Mar 11, 2012 5:01 pm
Location: wilmington nc
Motorcycle: 2005 vt750 ca
83goldwing
81custom 650
1973 tx500
1973 tx500 bobber
Contact:

Not fireing on 3 and 4 selender

Post by wingman83 » Tue Oct 15, 2019 10:32 pm



I have issue with the wires but not the yellow ones but the other group next to them white, blue yellow and another white I think not sure what they go too I got bike running and began to test the first white wire at the plug and bike started running fine cut bike on and off few times still great charge at idle is 12.60 goes up when reff up so I was going take for test ride and after put tank and seat back on ran bad again wanted to die so I pushed on wires like before ran better question is you think it's bad plug or ground n wire or what this wire goes to is bad and if it's bad where and what is it that it goes to thanks for help



Post Reply