This is the black plastic piece found in the top of a GL1100 carburetor. I have two that are cracked in a set of carbs I'm cleaning for use.
Does anyone know if these are exactly the same as those found in the GL500 and GL650 ?
Thanks
GL1100 Carburetor - Black plastic part - Banana clip
-
- Posts: 95
- Joined: Mon Apr 06, 2015 7:31 pm
- Location: Tampa, FL
- Motorcycle: 1982 GL1100 Standard and several GL650s , few GL500s
- Joneszy
- Posts: 180
- Joined: Sat Jun 24, 2017 10:27 pm
- Location: Manitoba Canada
- Motorcycle: 1983 GL1100A Aspencade Stripped
1999 Valkyrie CT
1978 Gl1000 "Trickster"
1979 Suzuki GS850(current project)
Re: GL1100 Carburetor - Black plastic part - Banana clip
I don't have the answer but when I am trying to crossover parts I usually go to the parts fiches on a site like Partzilla and locate the part. Quite often they will list the other bikes that use the same part #, or you can go to the fiche for the 82 Gl1100 and get the part#. I see there are three fiches for carb parts covering your bike, then go to the fiche for the 500 or 650 and compare the part #. Really the only way to confirm if it the same part or not.