I am experiencing leaking coming from my proportioning valve. I have checked the three brake line connections and it's not coming from those. Does it need to be rebuilt? (Can it be rebuilt?) Is it cracked? Does anyone have any idea where the leak would be coming from, and how to fix it?
Thank you in advance for any help you can provide.
Proportioning Valve Leaking
-
newday777
- Posts: 2146
- Joined: Tue Jan 11, 2011 5:21 pm
- Location: Milford NH summer/fall & Oceanside, CA winters(N San Diego) with lots of miles riden between
- Motorcycle: 2008 Cabernet Red. Level 4
1983 GL1100A Wineberry 36,000 miles
1975 CB750 K5 Planet Blue 7,800 miles
1976 CB750 K6 Anterris Red 25,000 miles
Past rides
1999A Restored from PO neglect & sold at 19,000 miles
1999SE Totaled by cager at 105,000 miles
Re: Proportioning Valve Leaking
Yes they can leak. There are no rebuild kits for them. The P valve is discontinued.
Yo can take it apart using a bit from a harbor freight security bit set. You might be able to make a rubber gasket from sheet rubber from a hardware store.
Yo can take it apart using a bit from a harbor freight security bit set. You might be able to make a rubber gasket from sheet rubber from a hardware store.
-
JoBoy68
- Posts: 76
- Joined: Tue Jun 11, 2019 10:28 am
- Location: Pawtucket Rhode Island
- Motorcycle: 1983 Honda GoldWing GL 1100 Interstate
Re: Proportioning Valve Leaking
I have a proportioning valve I do not need if you are still interested