Page 1 of 1

Rebuilding Rear Brake Master cylinder need push rod

Posted: Mon May 11, 2020 6:49 pm
by mgwaddell
I'm rebuilding my '81 GL1100 rear master cylinder. A would like to get a used/new pushrod that is no longer made/available. Any ideas as to a grate salvage yard or private seller for vintage GL's? Also, any advice on a subpart that will fix and work?

Mike

Re: Rebuilding Rear Brake Master cylinder need push rod

Posted: Mon May 11, 2020 11:59 pm
by utenka
this is as close as i could find, is that little bit what you are looking for?

https://www.ebay.com/itm/82-Honda-GL-11 ... SwRuVbM4M5

Re: Rebuilding Rear Brake Master cylinder need push rod

Posted: Tue May 12, 2020 7:52 am
by mgwaddell
Thank you very much. I have researched all of e-bay as of 5/11/2020 and have found nothing. The one you provide has a push rod that is not long enough. The one I need is part # 43530-463-006 approx. 3 inches.-
God Bless for you efforts.

Mike