Water pump replacement o-rings not listed


Information and questions on GL1100 Goldwings (1980-1983)
Post Reply
MisterE
Posts: 1
Joined: Thu Jun 04, 2020 6:29 am
Location: New Zealand
Motorcycle: 1982 GL1100

Water pump replacement o-rings not listed

Post by MisterE »



Hi All,

I'm currently replacing the water pump on my GL 1100. There appears to be two o-rings required that doesn't seem to be available on the Honda parts list. One smaller one that sits around a water inlet cleverly disguised as a locater pin and another to the far left that according to the youtube link below requires an o-ring size 11/16 OD x 7/8 ID.

Just wondering if anyone can advise the actual OEM numbers for these o-rings or if you can tell me the size of the smaller o-ring.




   Never miss a video: Subscribe to the GoldwingDocs YouTube channel today!



Good Hondog
Posts: 206
Joined: Sun May 14, 2017 6:56 pm
Location: Calgary, Alberta, Canada
Motorcycle: 1980 GL1100 Interstate
1978 GL1000

Re: Water pump replacement o-rings not listed

Post by Good Hondog »

I have those part numbers for you. The tiny one around the 8mm dowel pin is Honda part #91361-706-000 superseded by Honda part #91352-SA5-952. Both numbers are valid and both are the identical part still available new from Honda. The bigger one on the other side of the engine is Honda part #91333-567-010 superseded by Honda part #91333-KE5-003. Both numbers valid and identical parts and still available new from Honda.

Post Reply