Length of brake lines for '83

[bofler]

Have gone all around the internet and manuals searching for the lengths of the 3 brake lines for an '83 Interstate and can't find this information anywhere. Can anyone help with this?

[albinoredneck]

the rear brake line is about 42 inches long, end to end
the front brake line from the hand lever to the junction block is about 32 1/2 inches
and the 2 lines from the junction block to the calipers are about 16 inches each.

I have an 83 GL1100 Aspencade. I have changed the rear brake line thinking it was bad. i could not find the exact line for the bike so I went with on that was a little longer.. it works but it wasn't my problem.. it was the rear master cylinder. the return hole was plugged up.

[bofler]

Sure you have an '83? The '83s have the rear brake and front-right linked, so there is no junction block at the front, only a single line from the MC to the front-left caliper.

[albinoredneck]

it is an '82.
I'm not seeing any where to find the info you are looking for. maybe a Honda dealer parts shop?
my Aspencade and the old interstate are both '82's and both have the front and rear separate.

[bofler]

My research has brought me to this conclusion. Stock lines for an '83:

Rear = 16" / 15 degree banjo / female fitting
Front (R) = 33" / 15 degree banjo / female fitting
Front (L) = 48-49" / 15 degree banjo / 15 degree banjo